Пакет: flashprog (1.5-2~exp1)

[ Източник: flashprog  ]

Експериментален пакет

Предупреждение: Този пакет е от дистрибуцията experimental. Това означава, че е възможно да е нестабилен или да има грешки, а може дори и да предизвика загуба на данни. Прочетете информация за промените и останалата документация преди да го използвате.

Identify, read, write, erase, and verify BIOS/ROM/flash chips

flashprog is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips.

It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI.

The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images.

It can also be used to read the current existing BIOS/firmware from a flash chip.

Currently supported programmers include:

  * internal (for in-system flashing in the mainboard)
  * dummy (virtual programmer for testing flashprog)
  * nic3com (for flash ROMs on 3COM network cards)
  * nicrealtek (for flash ROMs on Realtek and SMC 1211 network cards)
  * nicnatsemi (for flash ROMs on National Semiconductor DP838* network cards)
  * nicintel (for parallel flash ROMs on Intel 10/100Mbit network cards)
  * gfxnvidia (for flash ROMs on NVIDIA graphics cards)
  * drkaiser (for flash ROMs on Dr. Kaiser PC-Waechter PCI cards)
  * satasii (for flash ROMs on Silicon Image SATA/IDE controllers)
  * satamv (for flash ROMs on Marvell SATA controllers)
  * atahpt (for flash ROMs on Highpoint ATA/RAID controllers)
  * atavia (for flash ROMs on VIA VT6421A SATA controllers)
  * atapromise (for flash ROMs on Promise PDC2026x ATA/RAID controllers)
  * it8212 (for flash ROMs on ITE IT8212F ATA/RAID controller)
  * ft2232_spi (for SPI flash ROMs attached to an FT2232/FT4232H/FT232H family
    based USB SPI programmer), including the DLP Design DLP-USB1232H,
    FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi,
    Amontec JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster,
    Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, TIAO/DIYGADGET USB
    Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP,
    Google Servo v1/v2, and FIC OpenMoko Neo1973 Debug board.
  * serprog (for flash ROMs attached to a programmer speaking serprog),
    including AVR flasher by Urja Rannikko, AVR flasher by eightdot,
    Arduino Mega flasher by fritz, InSystemFlasher by Juhana Helovuo,
    and atmegaXXu2-flasher by Stefan Tauner.
  * buspirate_spi (for SPI flash ROMs attached to a Bus Pirate)
  * dediprog (for SPI flash ROMs attached to a Dediprog SF100)
  * rayer_spi (for SPI flash ROMs attached to a RayeR parport based programmer)
  * pony_spi (for SPI flash ROMs attached to a SI-Prog serial port
    bitbanging adapter)
  * nicintel_spi (for SPI flash ROMs on Intel Gigabit network cards)
  * ogp_spi (for SPI flash ROMs on Open Graphics Project graphics card)
  * linux_spi (for SPI flash ROMs accessible via /dev/spidevX.Y on Linux)
  * usbblaster_spi (for SPI flash ROMs attached to an Altera USB-Blaster)
  * nicintel_eeprom (for SPI EEPROMs on Intel Gigabit network cards)
  * mstarddc_spi (for SPI flash ROMs accessible through DDC in MSTAR-equipped
    displays)
  * pickit2_spi (for SPI flash ROMs accessible via Microchip PICkit2)
  * ch341a_spi (for SPI flash ROMs attached to WCH CH341A)

Flashprog is a fork of flashrom and a continuation of flashrom-stable. flashprog, like flashrom-stable before, provides far more regular releases and newer chipset support compared to flashrom, so up-to-date chipset support can hopefully make it into stable distributions in time.

Други пакети, свързани с flashprog

• dep: libc6 (>= 2.42) [не alpha]

  GNU C Library: Shared libraries
  също и виртуален пакет, предлаган от libc6-udeb

• dep: libc6.1 (>= 2.42) [alpha]

  GNU C Library: Shared libraries
  също и виртуален пакет, предлаган от libc6.1-udeb

• dep: libftdi1-2 (>= 1.2)

  C Library to control and program the FTDI USB controllers

• dep: libgpiod2t64 (>= 1.1) [x32]

  C library for interacting with Linux GPIO device - shared libraries

• dep: libgpiod3 (>= 2.1) [не x32]

  C library for interacting with Linux GPIO device - shared libraries

• dep: libjaylink0 (>= 0.4.0)

  library for interacting with J-Link programmers

• dep: libpci3 (>= 1:3.13.0)

  PCI utilities (shared library)

• dep: libusb-1.0-0 (>= 2:1.0.22)

  userspace USB programming library

Изтегляне на flashprog

Изтегляне за всички налични архитектури

Архитектура	Големина на пакета	Големина след инсталиране	Файлове
alpha (неофициална архитектура)	166,5 кБ	956,0 кБ	[списък на файловете]
amd64	255,8 кБ	1 371,0 кБ	[списък на файловете]
arm64	186,6 кБ	1 147,0 кБ	[списък на файловете]
armhf	171,5 кБ	826,0 кБ	[списък на файловете]
hppa (неофициална архитектура)	154,1 кБ	805,0 кБ	[списък на файловете]
i386	257,0 кБ	1 166,0 кБ	[списък на файловете]
loong64	183,9 кБ	1 146,0 кБ	[списък на файловете]
m68k (неофициална архитектура)	145,8 кБ	745,0 кБ	[списък на файловете]
ppc64 (неофициална архитектура)	196,4 кБ	1 274,0 кБ	[списък на файловете]
ppc64el	209,6 кБ	1 275,0 кБ	[списък на файловете]
riscv64	183,0 кБ	1 047,0 кБ	[списък на файловете]
s390x	171,4 кБ	1 070,0 кБ	[списък на файловете]
sh4 (неофициална архитектура)	178,7 кБ	826,0 кБ	[списък на файловете]
sparc64 (неофициална архитектура)	158,0 кБ	1 088,0 кБ	[списък на файловете]
x32 (неофициална архитектура)	251,3 кБ	1 118,0 кБ	[списък на файловете]