Paquet : flashprog (1.5-2~exp1)

[ Paquet source : flashprog  ]

Paquet « expérimental »

Avertissement : ce paquet appartient à la distribution expérimentale. Cela signifie qu'il peut être instable ou bogué et peut éventuellement causer des pertes de données. Assurez-vous de consulter le journal des modifications (changelog) et les autres documentations existantes avant de l'utiliser.

Identify, read, write, erase, and verify BIOS/ROM/flash chips

flashprog is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips.

It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI.

The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images.

It can also be used to read the current existing BIOS/firmware from a flash chip.

Currently supported programmers include:

  * internal (for in-system flashing in the mainboard)
  * dummy (virtual programmer for testing flashprog)
  * nic3com (for flash ROMs on 3COM network cards)
  * nicrealtek (for flash ROMs on Realtek and SMC 1211 network cards)
  * nicnatsemi (for flash ROMs on National Semiconductor DP838* network cards)
  * nicintel (for parallel flash ROMs on Intel 10/100Mbit network cards)
  * gfxnvidia (for flash ROMs on NVIDIA graphics cards)
  * drkaiser (for flash ROMs on Dr. Kaiser PC-Waechter PCI cards)
  * satasii (for flash ROMs on Silicon Image SATA/IDE controllers)
  * satamv (for flash ROMs on Marvell SATA controllers)
  * atahpt (for flash ROMs on Highpoint ATA/RAID controllers)
  * atavia (for flash ROMs on VIA VT6421A SATA controllers)
  * atapromise (for flash ROMs on Promise PDC2026x ATA/RAID controllers)
  * it8212 (for flash ROMs on ITE IT8212F ATA/RAID controller)
  * ft2232_spi (for SPI flash ROMs attached to an FT2232/FT4232H/FT232H family
    based USB SPI programmer), including the DLP Design DLP-USB1232H,
    FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi,
    Amontec JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster,
    Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, TIAO/DIYGADGET USB
    Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP,
    Google Servo v1/v2, and FIC OpenMoko Neo1973 Debug board.
  * serprog (for flash ROMs attached to a programmer speaking serprog),
    including AVR flasher by Urja Rannikko, AVR flasher by eightdot,
    Arduino Mega flasher by fritz, InSystemFlasher by Juhana Helovuo,
    and atmegaXXu2-flasher by Stefan Tauner.
  * buspirate_spi (for SPI flash ROMs attached to a Bus Pirate)
  * dediprog (for SPI flash ROMs attached to a Dediprog SF100)
  * rayer_spi (for SPI flash ROMs attached to a RayeR parport based programmer)
  * pony_spi (for SPI flash ROMs attached to a SI-Prog serial port
    bitbanging adapter)
  * nicintel_spi (for SPI flash ROMs on Intel Gigabit network cards)
  * ogp_spi (for SPI flash ROMs on Open Graphics Project graphics card)
  * linux_spi (for SPI flash ROMs accessible via /dev/spidevX.Y on Linux)
  * usbblaster_spi (for SPI flash ROMs attached to an Altera USB-Blaster)
  * nicintel_eeprom (for SPI EEPROMs on Intel Gigabit network cards)
  * mstarddc_spi (for SPI flash ROMs accessible through DDC in MSTAR-equipped
    displays)
  * pickit2_spi (for SPI flash ROMs accessible via Microchip PICkit2)
  * ch341a_spi (for SPI flash ROMs attached to WCH CH341A)

Flashprog is a fork of flashrom and a continuation of flashrom-stable. flashprog, like flashrom-stable before, provides far more regular releases and newer chipset support compared to flashrom, so up-to-date chipset support can hopefully make it into stable distributions in time.

Autres paquets associés à flashprog

• dep: libc6 (>= 2.42) [non alpha]

  bibliothèque C GNU : bibliothèques partagées
  un paquet virtuel est également fourni par libc6-udeb

• dep: libc6.1 (>= 2.42) [alpha]

  bibliothèque C GNU : bibliothèques partagées
  un paquet virtuel est également fourni par libc6.1-udeb

• dep: libftdi1-2 (>= 1.2)

  bibliothèque C pour contrôler et programmer des contrôleurs USB FTDI

• dep: libgpiod2t64 (>= 1.1) [x32]

  C library for interacting with Linux GPIO device - shared libraries

• dep: libgpiod3 (>= 2.1) [non x32]

  C library for interacting with Linux GPIO device - shared libraries

• dep: libjaylink0 (>= 0.4.0)

  library for interacting with J-Link programmers

• dep: libpci3 (>= 1:3.13.0)

  utilitaires PCI – bibliothèque partagée

• dep: libusb-1.0-0 (>= 2:1.0.22)

  bibliothèque de programmation de l'USB en espace utilisateur

Télécharger flashprog

Télécharger pour toutes les architectures proposées

Architecture	Taille du paquet	Espace occupé une fois installé	Fichiers
alpha (portage non officiel)	166,5 ko	956,0 ko	[liste des fichiers]
amd64	255,8 ko	1 371,0 ko	[liste des fichiers]
arm64	186,6 ko	1 147,0 ko	[liste des fichiers]
armhf	171,5 ko	826,0 ko	[liste des fichiers]
hppa (portage non officiel)	154,1 ko	805,0 ko	[liste des fichiers]
i386	257,0 ko	1 166,0 ko	[liste des fichiers]
loong64	183,9 ko	1 146,0 ko	[liste des fichiers]
m68k (portage non officiel)	145,8 ko	745,0 ko	[liste des fichiers]
ppc64 (portage non officiel)	196,4 ko	1 274,0 ko	[liste des fichiers]
ppc64el	209,6 ko	1 275,0 ko	[liste des fichiers]
riscv64	183,0 ko	1 047,0 ko	[liste des fichiers]
s390x	171,4 ko	1 070,0 ko	[liste des fichiers]
sh4 (portage non officiel)	178,7 ko	826,0 ko	[liste des fichiers]
sparc64 (portage non officiel)	158,0 ko	1 088,0 ko	[liste des fichiers]
x32 (portage non officiel)	251,3 ko	1 118,0 ko	[liste des fichiers]