Пакет: linuxcnc-uspace (2.9.0~pre1+git20230208.f1270d6ed7-1)

[ Източник: linuxcnc  ]

motion controller for CNC machines and robots

LinuxCNC is a fully-realised CNC machine controller that can interpret machine-control programs (such as G-code), plan trajectories and finally output low-level signals to machine control hardware

LinuxCNC is modular and in principle the HAL (hardware abstraction layer), pluggable interpreters and variety of hardware drivers mean that it can control almost any software-defined physical system.

LinuxCNC relies on a realtime kernel to support real-time motion control, typically updating the position waypoints every 1mS and reacting to input within tens of microseconds.

Modules exist to use the low-level parts of LinuxCNC as a motion-control client for OpenPnP. Interfaces exist for ROS (the Robot Operating System) with which LinuxCNC has considerable overlap.

LinuxCNC supports arbitrary kinematics (the mapping between coordinate space and actuator space) and can control both parallel (eg Stewart platform) and serial (eg robot arm) systems in addition to conventional cartesian machine tools.

LinuxCNC supports 9 cartesian axes and 16 "Joints" (individual actuators) though the joint limit is build-time configurable.

A variety of interface hardware is supported including Modbus, EtherCAT, analogue +/-10V velocity control and Step/Dir. Step/Dir is supported by several hardware interfaces, including, but not limited to, the legacy Parallel Port.

A Hardware Abstraction Layer allows for great flexibility in signal mapping between the controller and the driver hardware. An extensive library of modules allow for complex signal processing within the HAL layer. For specialised tasks custom HAL components can be created using a C-like syntax and installed with the supplied tools.

By default LinuxCNC supports RS274 G-code but is extendable to parse other grammars such as STEP-NC or Gerber through support for pluggable interpreters.

If you want a computer to control things in the real world then LinuxCNC can do it. It is especially applicable to systems that are required to follow accurate paths described in cartesian space but has been used for numerous other applications.

This package provides the main package for LinuxCNC.

Етикети: Interface Toolkit: GTK

Други пакети, свързани с linuxcnc-uspace

• dep: blt

  graphics extension library for Tcl/Tk - run-time

• dep: bwidget (>= 1.7)

  Extension widgets for Tcl/Tk

• dep: iptables

  administration tools for packet filtering and NAT

• dep: libboost-python1.74.0 (>= 1.74.0+ds1)

  Boost.Python Library

• dep: libboost-python1.74.0-py311

  виртуален пакет, предлаган от libboost-python1.74.0

• dep: libc6 (>= 2.35)

  GNU C Library: Shared libraries
  също и виртуален пакет, предлаган от libc6-udeb

• dep: libcairo2 (>= 1.2.4)

  Cairo 2D vector graphics library

• dep: libedit2 (>= 2.11-20080614-0)

  BSD editline and history libraries

• dep: libepoxy0 (>= 1.0)

  OpenGL function pointer management library

• dep: libgcc-s1 (>= 4.0)

  GCC support library

• dep: libglib2.0-0 (>= 2.12.0)

  GLib library of C routines

• dep: libgtk-3-0 (>= 3.11.5)

  GTK graphical user interface library

• dep: libgtk2.0-0 (>= 2.8.0)

  GTK graphical user interface library - old version

• dep: libgtksourceview-3.0-dev

  development files for the GTK+ syntax highlighting widget

• dep: libmodbus5 (>= 3.1.4)

  library for the Modbus protocol

• dep: libpango-1.0-0 (>= 1.14.0)

  Layout and rendering of internationalized text

• dep: libpangocairo-1.0-0 (>= 1.14.0)

  Layout and rendering of internationalized text

• dep: libpython3.11 (>= 3.11.0)

  Shared Python runtime library (version 3.11)

• dep: libstdc++6 (>= 11)

  GNU Standard C++ Library v3

• dep: libtirpc3 (>= 1.0.2)

  transport-independent RPC library

• dep: libtk8.6 (>= 8.6.0)

  Tk toolkit for Tcl and X11 v8.6 - run-time files

• dep: libudev-dev

  libudev development files

• dep: libudev1 (>= 183)

  libudev shared library

• dep: libusb-1.0-0 (>= 2:1.0.22)

  userspace USB programming library

• dep: libx11-6

  X11 client-side library

• dep: libxinerama1 (>= 2:1.1.4)

  X11 Xinerama extension library

• dep: libxmu6 (>= 2:1.1.3)

  X11 miscellaneous utility library

• dep: mesa-utils

  Miscellaneous Mesa utilities -- symlinks

• dep: procps

  /proc file system utilities

• dep: psmisc

  utilities that use the proc file system

• dep: python3

  interactive high-level object-oriented language (default python3 version)

  dep: python3 (<< 3.12)

  dep: python3 (>= 3.11~)

• dep: python3-cairo

  Python3 bindings for the Cairo vector graphics library

• dep: python3-configobj

  simple but powerful config file reader and writer for Python 3

• dep: python3-gi-cairo

  Python 3 Cairo bindings for the GObject library

• dep: python3-numpy

  Fast array facility to the Python 3 language

• dep: python3-opengl

  Python bindings to OpenGL (Python 3)

• dep: python3-tk

  Tkinter - Writing Tk applications with Python 3.x

• dep: python3-xlib

  interface for Python 3 to the X11 protocol

• dep: tcl8.6

  Tcl (the Tool Command Language) v8.6 - shell

• dep: tclreadline

  виртуален пакет, предлаган от tcl-tclreadline

• dep: tclx

  виртуален пакет, предлаган от tclx8.4

• dep: tk8.6

  Tk toolkit for Tcl and X11 v8.6 - windowing shell

• dep: udev

  /dev/ and hotplug management daemon

• rec: espeak

  Multi-lingual software speech synthesizer
  също и виртуален пакет, предлаган от espeak-ng-espeak

• rec: espeak-ng

  Multi-lingual software speech synthesizer

• rec: gstreamer1.0-tools

  Tools for use with GStreamer

• rec: hostmot2-firmware-all

  Пакетът не е наличен

• rec: librsvg2-dev

  SAX-based renderer library for SVG files (development)

• rec: linux-image-rt-686-pae [i386]

  Linux for modern PCs (meta-package)

• rec: linux-image-rt-amd64 [amd64]

  Linux for 64-bit PCs (meta-package)

• rec: linuxcnc-doc-en

  motion controller for CNC machines and robots (English documentation)

  или linuxcnc-doc

  виртуален пакет, предлаган от linuxcnc-doc-de, linuxcnc-doc-en, linuxcnc-doc-es, linuxcnc-doc-fr, linuxcnc-doc-zh-cn

• rec: pyqt5-dev-tools

  Development tools for PyQt5

• rec: python3-dbus

  simple interprocess messaging system (Python 3 interface)

• rec: python3-dbus.mainloop.pyqt5

  D-Bus Qt main loop support for Python 3

• rec: python3-espeak

  Python bindings for eSpeak

• rec: python3-opencv

  Python 3 bindings for the computer vision library

• rec: python3-pil

  Python Imaging Library (Python3)

• rec: python3-pil.imagetk

  Python Imaging Library - ImageTk Module (Python3)

• rec: python3-poppler-qt5

  Python binding to Poppler-Qt5 C++ library (Python 3)

• rec: python3-pyqt5

  Python 3 bindings for Qt5

• rec: python3-pyqt5.qsci

  Python 3 bindings for QScintilla 2 with Qt 5

• rec: python3-pyqt5.qtopengl

  Python 3 bindings for Qt5's OpenGL module

• rec: python3-pyqt5.qtsvg

  Python 3 bindings for Qt5's SVG module

• rec: python3-pyqt5.qtwebkit

  Python 3 bindings for Qt5's WebKit module

• rec: sound-theme-freedesktop

  freedesktop.org sound theme

• sug: mesaflash

  Mesa Electronics utility tool

• sug: onboard

  Simple On-screen Keyboard

Изтегляне на linuxcnc-uspace

Изтегляне за всички налични архитектури

Архитектура	Големина на пакета	Големина след инсталиране	Файлове
amd64	21 082,6 кБ	81 860,0 кБ	[списък на файловете]
arm64	20 541,0 кБ	92 067,0 кБ	[списък на файловете]
armel	20 809,3 кБ	80 281,0 кБ	[списък на файловете]
armhf	20 786,3 кБ	78 687,0 кБ	[списък на файловете]
i386	21 120,6 кБ	81 729,0 кБ	[списък на файловете]
mips64el	20 590,8 кБ	94 053,0 кБ	[списък на файловете]
mipsel	20 601,7 кБ	92 793,0 кБ	[списък на файловете]
ppc64el	20 754,7 кБ	93 615,0 кБ	[списък на файловете]
s390x	20 868,3 кБ	81 269,0 кБ	[списък на файловете]