Пакет: xc3sprog (0+svn795+dfsg-4)
Ссылки для xc3sprog
Ресурсы Debian:
- Сообщения об ошибках
- Developer Information
- Debian журнал изменений
- Файл авторских прав
- Отслеживание заплат Debian
Исходный код xc3sprog:
- [xc3sprog_0+svn795+dfsg-4.dsc]
- [xc3sprog_0+svn795+dfsg.orig.tar.gz]
- [xc3sprog_0+svn795+dfsg-4.debian.tar.xz]
Сопровождающий:
Внешние ресурсы:
- Сайт [xc3sprog.sourceforge.net]
Подобные пакеты:
JTAG flashing tool for FPGAs, CPLDs and EEPROMs
xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.
The main features include:
- Reading a .BIT file from Xilinx design tools and programming it into an FPGA. - Reading a JEDEC file and programming it into a CPLD. - Programming a .BIT file into an on-board configuration PROM. - Programming a binary image into on-board SPI flash memory. - Reading the contents of a PROM chip back to a file. - Programming AVR microcontrollers.
The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:
- xc3sprog is free software. - It is a command-line tool. - It works on Linux without the need to install binary "cable-drivers". (Although some types of JTAG cables need to load firmware.) - It uses an optional configuration file to recognize new JTAG devices. - It contains programming algorithms for the supported devices, enabling the direct use of binary files (.BIT / JEDEC) from design tools (as opposed to intermediate SVF/STAPLE files).
Другие пакеты, относящиеся к xc3sprog
|
|
|
|
-
- dep: libc6 (>= 2.14) [amd64]
- библиотека GNU C: динамически подключаемые библиотеки
также виртуальный пакет, предоставляемый libc6-udeb
- dep: libc6 (>= 2.17) [arm64, ppc64el]
- dep: libc6 (>= 2.7) [не amd64, arm64, ppc64el]
-
- dep: libftdi1-2 (>= 1.2)
- C Library to control and program the FTDI USB controllers
-
- dep: libgcc-s1 (>= 3.0) [не armel, armhf]
- вспомогательная библиотека GCC
- dep: libgcc-s1 (>= 3.5) [armel, armhf]
-
- dep: libstdc++6 (>= 5.2)
- стандартная библиотека GNU C++ версии 3
-
- dep: libusb-0.1-4 (>= 2:0.1.12)
- библиотека для работы с USB
Загрузка xc3sprog
Архитектура | Размер пакета | В установленном виде | Файлы |
---|---|---|---|
amd64 | 156,4 Кб | 692,0 Кб | [список файлов] |
arm64 | 147,7 Кб | 676,0 Кб | [список файлов] |
armel | 137,2 Кб | 596,0 Кб | [список файлов] |
armhf | 139,7 Кб | 496,0 Кб | [список файлов] |
i386 | 163,6 Кб | 724,0 Кб | [список файлов] |
mips64el | 152,5 Кб | 815,0 Кб | [список файлов] |
mipsel | 151,1 Кб | 728,0 Кб | [список файлов] |
ppc64el | 163,2 Кб | 1 076,0 Кб | [список файлов] |
s390x | 143,9 Кб | 696,0 Кб | [список файлов] |