Paquet : xc3sprog (0+svn795+dfsg-4)

[ Paquet source : xc3sprog  ]

JTAG flashing tool for FPGAs, CPLDs and EEPROMs

xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.

The main features include:

 - Reading a .BIT file from Xilinx design tools and programming it into an
   FPGA.
 - Reading a JEDEC file and programming it into a CPLD.
 - Programming a .BIT file into an on-board configuration PROM.
 - Programming a binary image into on-board SPI flash memory.
 - Reading the contents of a PROM chip back to a file.
 - Programming AVR microcontrollers.

The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:

 - xc3sprog is free software.
 - It is a command-line tool.
 - It works on Linux without the need to install binary "cable-drivers".
   (Although some types of JTAG cables need to load firmware.)
 - It uses an optional configuration file to recognize new JTAG devices.
 - It contains programming algorithms for the supported devices, enabling
   the direct use of binary files (.BIT / JEDEC) from design tools (as opposed
   to intermediate SVF/STAPLE files).

Autres paquets associés à xc3sprog

• dep: libc6 (>= 2.14) [amd64]

  bibliothèque C GNU : bibliothèques partagées
  un paquet virtuel est également fourni par libc6-udeb

  dep: libc6 (>= 2.17) [arm64, ppc64el]

  dep: libc6 (>= 2.7) [non amd64, arm64, ppc64el]

• dep: libftdi1-2 (>= 1.2)

  C Library to control and program the FTDI USB controllers

• dep: libgcc-s1 (>= 3.0) [non armel, armhf]

  bibliothèque de prise en charge de GCC

  dep: libgcc-s1 (>= 3.5) [armel, armhf]

• dep: libstdc++6 (>= 5.2)

  bibliothèque standard C++ de GNU v3

• dep: libusb-0.1-4 (>= 2:0.1.12)

  bibliothèque de programmation de l'USB en espace utilisateur

Télécharger xc3sprog

Télécharger pour toutes les architectures proposées

Architecture	Taille du paquet	Espace occupé une fois installé	Fichiers
amd64	156,4 ko	692,0 ko	[liste des fichiers]
arm64	147,7 ko	676,0 ko	[liste des fichiers]
armel	137,2 ko	596,0 ko	[liste des fichiers]
armhf	139,7 ko	496,0 ko	[liste des fichiers]
i386	163,6 ko	724,0 ko	[liste des fichiers]
mips64el	152,5 ko	815,0 ko	[liste des fichiers]
mipsel	151,1 ko	728,0 ko	[liste des fichiers]
ppc64el	163,2 ko	1 076,0 ko	[liste des fichiers]
s390x	143,9 ko	696,0 ko	[liste des fichiers]