Пакунок: libflashprog-dev (1.5-2~exp1) [debports]

[ Source:  ]

Експериментальний пакунок

Warning: This package is from the experimental distribution. That means it is likely unstable or buggy, and it may even cause data loss. Please be sure to consult the changelog and other possible documentation before using it.

Identify, read, write, erase, and verify BIOS/ROM/flash chips - development

flashprog is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips.

It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI.

The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images.

It can also be used to read the current existing BIOS/firmware from a flash chip.

This package provides flashprog header development files.

Інші пакунки пов'язані з libflashprog-dev

• dep: libflashprog1 (= 1.5-2~exp1)

  Identify, read, write, erase, and verify BIOS/ROM/flash chips - library

Завантажити libflashprog-dev

Завантаження для всіх доступних архітектур

Архітектура	Розмір пакунка	Розмір після встановлення	Файли
alpha (unofficial port)	6.7 kB	29.0 kB	[список файлів]