Software Packages in "forky", Subsection electronics
- altos (1.9.22-3)
- Altus Metrum firmware and utilities
- arachne-pnr (0.1+20190728gitc40fb22-3+b2 [arm64], 0.1+20190728gitc40fb22-3+b1 [loong64, riscv64], 0.1+20190728gitc40fb22-3 [amd64, armhf, i386, ppc64el, s390x])
- Place and route tool for iCE40 family FPGAs
- arachne-pnr-chipdb (0.1+20190728gitc40fb22-3)
- Chip db files for arachne-pnr
- arduino (2:1.8.19+dfsg1-5)
- AVR development board IDE from Arduino CC
- arduino-builder (1.3.25-5+b4 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x], 1.3.25-5+b1 [loong64])
- Command line tool for compiling Arduino sketches
- arduino-cli (1.5.1-2)
- Arduino command line tool (program)
- arduino-dfu-discovery (0.1.2+ds1-1)
- Arduino pluggable discovery for dfu devices
- arduino-mdns-discovery (1.1.0+ds1-1+b1 [amd64], 1.1.0+ds1-1 [arm64, armhf, i386, loong64, ppc64el, riscv64, s390x])
- mdns (bonjour) pluggable discovery for arduino-cli
- arduino-mighty-1284p (1-5)
- Platform files for Arduino to run on ATmega1284P
- arduino-mk (1.5.2-2.1)
- Program your Arduino from the command line
- arduino-serial-discovery (1.5.2+ds1-1)
- Arduino pluggable-discovery for serial ports
- arduino-serial-monitor (0.15.0+ds1-1)
- Arduino pluggable monitor for serial ports
- atlc (4.6.1-6+b1 [loong64], 4.6.1-6 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x])
- Arbitrary Transmission Line Calculator
- atlc-examples (4.6.1-6)
- Examples for Arbitrary Transmission Line Calculator
- avarice (2.14+svn427-2+b1 [arm64, loong64], 2.14+svn427-2 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- use GDB with Atmel AVR debuggers
- avra (1.4.2+dfsg-1+b3 [arm64], 1.4.2+dfsg-1+b2 [riscv64], 1.4.2+dfsg-1+b1 [loong64], 1.4.2+dfsg-1 [amd64, armhf, i386, ppc64el, s390x])
- assembler for Atmel AVR microcontrollers
- avrdude (7.1+dfsg-4+b1 [loong64], 7.1+dfsg-4 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x])
- software for programming Atmel AVR microcontrollers
- avrp (1.0beta3-8+b1 [arm64, loong64], 1.0beta3-8 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- Programmer for Atmel AVR microcontrollers
- bcnc (0.9.14.318+ds-5)
- GRBL CNC command sender, autoleveler and g-code editor
- bossa (1.9.1-3+b8 [arm64], 1.9.1-3+b6 [amd64, armhf, i386, ppc64el, riscv64, s390x], 1.9.1-3+b1 [loong64])
- Atmel SAM ARM microcontroller flash programming GUI
- bossa-cli (1.9.1-3+b8 [arm64], 1.9.1-3+b6 [amd64, armhf, i386, ppc64el, riscv64, s390x], 1.9.1-3+b1 [loong64])
- Atmel SAM ARM microcontroller flash programming utility
- bottlerocket (0.05b3-24)
- Utility to control X10 Firecracker devices for home automation
- camv-rnd (1.1.7-1)
- Standard installation of camv-rnd
- camv-rnd-core (1.1.7-1)
- camv-rnd executable with the core functionality and boxsym-rnd
- camv-rnd-doc (1.1.7-1)
- Documentation for camv-rnd
- (1.1.7-1)
- Export formats: special/extra
- camv-rnd-export-gd (1.1.7-1)
- Export formats that require libgd.
- camv-rnd-export-vector (1.1.7-1)
- Export formats: vector graphics
- camv-rnd-import (1.1.7-1)
- Standard import file format support (PCB).
- camv-rnd-lib-gui (1.1.7-1)
- Support library for building the GUI.
- caneda (0.4.0-2+b2 [arm64], 0.4.0-2+b1 [amd64, armhf, i386, loong64, ppc64el, riscv64, s390x])
- Electronic Design Automation software focused on easy of use and portability
- canmatrix-utils (1.2~github-1)
- Handle CAN (Controller Area Network) descriptions - cmdline utilities
- canopenterm (2.03-4)
- Tool for developing, testing and analyzing CANopen CC networks and devices
- circuit-macros (10.1.4-1)
- Macros for drawing electric circuits
- ckb-next (0.6.2+dfsg-1+b1)
- driver for Corsair keyboards and mice
- cleware-traffic-light (1.0.8~git20240522.f5e418d-2)
- CLI tool to control the cleware USB traffic light
- covered (0.7.10-9)
- Verilog code coverage analysis tool
- cycfx2prog (0.47-1.4+b1 [loong64], 0.47-1.4 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x])
- Cypress EZ-USB FX2 (LP) programmer
- dfcgen-gtk (0.6-3)
- Digital Filter Coefficients Generator (DFCGen) GTK+
- dfu-programmer (1.1.0-3)
- device firmware update (DFU) based USB programmer for Atmel chips
- dfu-util (0.11-3+b1 [arm64, loong64], 0.11-3 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- Device firmware update (DFU) USB programmer
- digitemp (3.7.2-3+b1 [arm64, loong64], 3.7.2-3 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- read temperature sensors in a 1-Wire net
- dpic (2023.06.01-1+b2 [arm64], 2023.06.01-1+b1 [loong64, riscv64], 2023.06.01-1 [amd64, armhf, i386, ppc64el, s390x])
- pic-language converter to LaTeX-compatible and other formats
- drawtiming (0.7.1-11+b2 [loong64], 0.7.1-11+b1 [arm64], 0.7.1-11 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- tool for documenting hardware designs through timing diagrams
- electric (9.08.1+dfsg-1)
- electrical CAD system
- emu8051 (2.0.1-3+b3 [arm64], 2.0.1-3+b2 [riscv64], 2.0.1-3+b1 [amd64, armhf, i386, loong64, ppc64el, s390x])
- Emulator and simulator for 8051 microcontrollers
- esptool (4.7.0+dfsg-0.2)
- create and flash firmware files to ESP8266 and ESP32 chips
- flashprog (1.5-2)
- Identify, read, write, erase, and verify BIOS/ROM/flash chips
- flashrom (1.6.0-3)
- Identify, read, write, erase, and verify BIOS/ROM/flash chips
- fpga-icestorm (1.1-1)
- Tools to handle the bitstream format of Lattice iCE40 FPGAs
- fpga-icestorm-chipdb (1.1-1)
- Chip database files for fpga-icestorm
- fpga-peppercorn (1.12-1)
- Tools for interacting with Cologne Chip GateMate FPGA bitstreams
- fpga-peppercorn-delay (1.12-1)
- Propagation Delay Database for Cologne Chip GateMate FPGA bitstreams
- fpga-trellis (1.4-3+b1)
- Tools for interacting with Lattice ECP5 FPGA bitstreams
- fpga-trellis-database (1.4-3)
- Lattice ECP5 FPGA bitstream database
- fritzing (1.0.1-1.2)
- Easy-to-use electronic design software
- fritzing-data (1.0.1-1.2)
- Easy-to-use electronic design software (data files)
- fritzing-parts (0.9.6~unreleased-1)
- Easy-to-use electronic design software (parts files)
- ghdl (6.0.0+dfsg3-1)
- VHDL compiler/simulator
- ghdl-common (6.0.0+dfsg3-1)
- VHDL compiler/simulator (common files)
- ghdl-gcc (6.0.0+dfsg3-1)
- VHDL compiler/simulator (GCC backend)
- ghdl-llvm (6.0.0+dfsg3-1)
- VHDL compiler/simulator (LLVM backend)
- ghdl-mcode (6.0.0+dfsg3-1)
- VHDL compiler/simulator (mcode backend)
- ghdl-tools (6.0.0+dfsg3-1)
- VHDL compiler/simulator (tools)
- glogic (2.6-7)
- graphical logic circuit simulator
- gnucap (1:0.36~20171003-1.1+b4)
- GNU Circuit Analysis package, main executable
- gnucap-common (1:0.36~20171003-1.1)
- GNU Circuit Analysis package, development headers
- gnucap-default-plugins0 (1:0.36~20171003-1.1+b4)
- GNU Circuit Analysis package, default plugins
- gnusim8085 (1.4.1-1+b4 [arm64], 1.4.1-1+b2 [amd64, armhf, i386, ppc64el, riscv64, s390x], 1.4.1-1+b1 [loong64])
- Graphical Intel 8085 simulator, assembler and debugger
- gpsim (0.32.1-4)
- Simulator for Microchip's PIC microcontrollers
- gputils (1.5.2-2+b1 [arm64, loong64], 1.5.2-2 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- GNU PIC utilities
- gputils-common (1.5.2-2)
- headers and linker scripts for gputils
- gtkwave (3.3.127-1)
- VCD (Value Change Dump) file waveform viewer
- horizon-eda (2.6.0-2.3+b2 [arm64], 2.6.0-2.3+b1 [amd64, armhf, i386, ppc64el, riscv64, s390x], 2.6.0-2.3 [loong64])
- EDA layout and schematic application
- imx-code-signing-tool (4.0.1+dfsg-2)
- code signing tool for i.MX platform
- imx-usb-loader (0~git20200517.30b43d69-2+b2 [arm64], 0~git20200517.30b43d69-2+b1 [loong64, riscv64], 0~git20200517.30b43d69-2 [amd64, armhf, i386, ppc64el, s390x])
- imx_loader - i.MX/Vybrid recovery utility
- irsim (9.7.104-1.2+b1 [loong64], 9.7.104-1.2 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x])
- Switch-level simulator
- iverilog (13.0-2)
- Icarus verilog compiler
- kicad (10.0.5+dfsg-1)
- Electronic schematic and PCB design software
- kicad-demos (10.0.5+dfsg-1)
- Demo projects for kicad
- kicad-doc-de (10.0.5+dfsg-1)
- Kicad help files (German)
- kicad-doc-en (10.0.5+dfsg-1)
- Kicad help files (English)
- kicad-doc-es (10.0.5+dfsg-1)
- Kicad help files (Spanish)
- kicad-doc-fr (10.0.5+dfsg-1)
- Kicad help files (French)
- kicad-doc-ja (10.0.5+dfsg-1)
- Kicad help files (Japanese)
- (10.0.5-1)
- Footprint symbols for KiCad's Pcbnew
- kicad-gruvbox-theme (1.1-2)
- Gruvbox colorscheme for KiCad
- kicad-library-utils (0.0~git20260724.8a0f223-1)
- scripts for KiCad library development
- kicad-packages3d (10.0.5-1)
- 3D models for 3D viewer in KiCad's Pcbnew and Footprint Editor
- kicad-symbols (10.0.5-1)
- Schematic symbols for KiCad's Eeschema
- kicad-templates (10.0.0-1)
- Project templates for KiCad
- klayout (0.30.0-1+b3 [arm64], 0.30.0-1+b2 [amd64, armhf, i386, loong64, ppc64el, riscv64, s390x])
- High Performance Layout Viewer and Editor
- langford-utils (0.0.20130228-7+b2 [loong64], 0.0.20130228-7+b1 [arm64], 0.0.20130228-7 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- Control programs for the Per Vices Noctar IQ demodulator board
- lepton-eda (1.9.18-4+b1 [loong64], 1.9.18-4 [amd64, arm64, armhf, i386, ppc64el, riscv64])
- Lepton Electronic Design Automation
- libghdl-6-0-0 (6.0.0+dfsg3-1)
- VHDL compiler/simulator (shared library)
- libghdl-dev (6.0.0+dfsg3-1)
- VHDL compiler/simulator (library development files)
- libnxt (0.5.2-1+b1 [arm64, loong64], 0.5.2-1 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- utility library for talking to the LEGO Mindstorms NXT brick
- librepcb (1.2.0+dfsg-3+b3 [arm64], 1.2.0+dfsg-3+b2 [amd64, armhf, i386, ppc64el, riscv64, s390x], 1.2.0+dfsg-3+b1 [loong64])
- EDA software to develop printed circuit boards
- librnd4-cloud (4.5.0-1)
- Networking plugins for accessing remote resources.
- librnd4-dev (4.5.0-1)
- Ringdove 2D cad library, files for development.
- librnd4-doc (4.5.0-1)
- Documentation for librnd.
- librnd4-hid-gtk4-gl (4.5.0-1)
- GUI: gtk4, opengl
- librnd4-hid-lesstif (4.5.0-1)
- GUI: motif/lesstif, software render
- librnd4-lib-gl (4.5.0-1)
- Support library for rendering with opengl.
- librnd4-lib-gui (4.5.0-1)
- Support library for building the GUI.
- librnd4-pixmap (4.5.0-1)
- Import and export pixmap images.
- librnd4t64 (4.5.0-1)
- Ringdove 2D CAD library framework
- listserialportsc (1.4.0+repack-1+b3)
- list serial ports
- lpctools (1.07-3+b1 [arm64, loong64], 1.07-3 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- interface to NXP LPC Microcontrollers ISP serial interface
- m16c-flash (0.1-2+b1 [arm64, loong64], 0.1-2 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- Flash programmer for Renesas M16C and R8C microcontrollers
- mcu8051ide (1.4.9-3)
- Graphical Integrated Development Environment for 8051
- mspdebug (0.25-1+b1 [arm64, loong64], 0.25-1 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- debugging tool for MSP430 microcontrollers
- nanovna-saver (0.7.4~pre1-1)
- view and export Touchstone data from a NanoVNA radio network tester device
- nbc (1.2.1.r4+dfsg-16)
- C compiler for LEGO Mindstorms NXT bricks
- netgen-lvs (1.5.133-1.2+b2 [arm64], 1.5.133-1.2+b1 [loong64, riscv64], 1.5.133-1.2 [amd64, armhf, i386, ppc64el, s390x])
- Netlist comparison - Layout vs Schematic (LVS)
- nextpnr-ecp5 (0.10-5+b1)
- FPGA place and route tool for Lattice ECP5
- nextpnr-ecp5-chipdb (0.10-5+b1)
- FPGA place and route tool for Lattice ECP5 -- chipdb files
- nextpnr-ecp5-qt (0.10-5+b1)
- FPGA place and route tool for Lattice ECP5 - with GUI
- nextpnr-generic (0.10-5+b1)
- FPGA place and route tool for Generic FPGAs
- nextpnr-gowin (0.10-5)
- transitional dummy package -- replaced by nextpnr-himbaechel
- nextpnr-gowin-chipdb (0.10-5)
- transitional dummy package -- replaced by nextpnr-himbaechel
- nextpnr-gowin-qt (0.10-5)
- transitional dummy package -- replaced by nextpnr-himbaechel
- nextpnr-himbaechel-gatemate (0.10-5+b1)
- FPGA place and route tool for Cologne Chip GateMate
- nextpnr-himbaechel-gatemate-chipdb (0.10-5+b1)
- FPGA place and route tool for Cologne Chip GateMate -- chipdb files
- nextpnr-himbaechel-gatemate-qt (0.10-5+b1)
- FPGA place and route tool for Cologne Chip GateMate - with GUI
- nextpnr-himbaechel-gowin (0.10-5+b1)
- FPGA place and route tool for Gowin GW1N
- nextpnr-himbaechel-gowin-chipdb (0.10-5+b1)
- FPGA place and route tool for Gowin GW1N -- chipdb files
- nextpnr-himbaechel-gowin-qt (0.10-5+b1)
- FPGA place and route tool for Gowin GW1N - with GUI
- nextpnr-ice40 (0.10-5+b1)
- FPGA place and route tool for Lattice iCE40
- nextpnr-ice40-chipdb (0.10-5+b1)
- FPGA place and route tool for Lattice iCE40 -- chipdb files
- nextpnr-ice40-qt (0.10-5+b1)
- FPGA place and route tool for Lattice iCE40 - with GUI
- ngspice (46+ds-1)
- Spice circuit simulator
- nitpic (0.1-25+b2 [loong64], 0.1-25+b1 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x])
- simulator for the Microchip PIC16C84 microcontroller
- nxt-firmware (1.29.8-1)
- Improved firmware for LEGO Mindstorms NXT bricks
- openfpgaloader (0.13.1-1.1)
- Universal utility for programming FPGAs
- ow-shell (3.2p4+dfsg1-7+b2)
- shell utilities to talk to an 1-Wire owserver
- ow-tools (3.2p4+dfsg1-7)
- tools to monitor or inspect a ow-server link
- owfs (3.2p4+dfsg1-7)
- Dallas 1-wire support
- owfs-common (3.2p4+dfsg1-7)
- common files used by any of the OWFS programs
- owftpd (3.2p4+dfsg1-7+b2)
- FTP daemon providing access to 1-Wire networks
- owhttpd (3.2p4+dfsg1-7+b2)
- HTTP daemon providing access to 1-Wire networks
- owserver (3.2p4+dfsg1-7+b2)
- Backend server for 1-Wire control
- pcb-rnd (3.1.8-1)
- Standard installation of pcb-rnd
- pcb-rnd-auto (3.1.8-1)
- Autoroute and autoplace.
- pcb-rnd-cloud (3.1.8-1)
- Networking plugins.
- pcb-rnd-core (3.1.8-1)
- pcb-rnd executable with the core functionality
- pcb-rnd-debug (3.1.8-1)
- Debug and diagnostics.
- pcb-rnd-doc (3.1.8-1)
- Documentation for pcb-rnd
- pcb-rnd-export (3.1.8-1)
- Common export plugins.
- (3.1.8-1)
- Export formats: special/extra
- pcb-rnd-export-sim (3.1.8-1)
- Export plugins to simulators
- (3.1.8-1)
- Extra action commands and optional functionality.
- pcb-rnd-import-geo (3.1.8-1)
- Geometry import.
- pcb-rnd-import-net (3.1.8-1)
- Netlist/schematics import plugins.
- pcb-rnd-io-alien (3.1.8-1)
- File format compatibility with other PCB layout designers.
- pcb-rnd-io-standard (3.1.8-1)
- Commonly used non-native board and footprint file formats
- pcb-rnd-lib-gui (3.1.8-1)
- Support library for building the GUI.
- pcb-rnd-lib-io (3.1.8-1)
- Support library for alien file formats.
- pd-pduino (0.8-5)
- interfacing with the Arduino from within Pure Data (Pd)
- pd-xbee (0.1~svn17672-12+b1 [loong64], 0.1~svn17672-12 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x])
- interfacing with your XBee from within Pure Data (Pd)
- prjxray (0.1+git3356.gc9f02d85+~db20211214.g0a0added-4)
- FPGA bitstream tools for Xilinx Artix7/Kintex7/Spartan7/Zynq7
- prjxray-database (0.1+git3356.gc9f02d85+~db20211214.g0a0added-4)
- FPGA tile database for Xilinx Artix7/Kintex7/Spartan7/Zynq7
- pulseview (0.4.2-5)
- sigrok logic analyzer, oscilloscope, and MSO GUI
- pycirkuit (0.5.1-3.1)
- front-end for "Circuit Macros" and the PIC language
- python3-apycula (0.32+dfsg1-1)
- Tools to generate Gowin FPGA bitstreams
- python3-cocotb (2.0.1-3.1)
- library for writing VHDL and Verilog testbenches in Python
- python3-peppercorn (1.12-1)
- Library for interacting with Cologne Chip GateMate FPGA bitstreams
- python3-pytrellis (1.4-3+b1)
- Library for interacting with Lattice ECP5 FPGA bitstreams
- python3-pyuvm (4.0.1-1.1)
- Python implementation of the UVM using cocotb
- qelectrotech (1:0.9-3+b1 [arm64, loong64], 1:0.9-3 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- Electric schematic editor
- qelectrotech-data (1:0.9-3)
- symbols needed for qelectrotech
- qelectrotech-examples (1:0.9-3)
- examples files for qelectrotech
- qflipper (1.3.3-2+b1 [arm64, loong64], 1.3.3-2 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- Flipper Zero firmware updater
- qrouter (1.4.88-2+b1 [arm64, loong64], 1.4.88-2 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- Multi-level, over-the-cell maze router
- resistor-decoder (1.0+git20210809.5d4be1c-1)
- Qt GUI tool for decoding through-hole resistors and SMD parts
- rfdump (1.6-9.1+b3 [arm64, riscv64], 1.6-9.1+b1 [amd64, armhf, i386, loong64, ppc64el, s390x])
- tool to decode RFID tag data
- ringdove (2)
- Electronics Design Automation (EDA) tool suite
- route-rnd (0.9.3-1+b1 [loong64], 0.9.3-1 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x])
- external autorouter for pcb-rnd
- savvycan (220-1)
- CAN bus reverse engineering and capture tool
- scantool (2.1-2.1+b3 [arm64], 2.1-2.1+b2 [loong64, riscv64], 2.1-2.1+b1 [amd64, armhf, i386, ppc64el, s390x])
- OBD-II vehicle diagnostic scanner
- sch-rnd (1.0.11-2)
- Standard installation of sch-rnd
- sch-rnd-core (1.0.11-2)
- sch-rnd executable with the core functionality and boxsym-rnd
- sch-rnd-debug (1.0.11-2)
- Debug and diagnostics.
- sch-rnd-doc (1.0.11-2)
- Documentation for sch-rnd
- (1.0.11-2)
- Export formats: special/extra
- sch-rnd-export-gd (1.0.11-2)
- Export formats that require libgd.
- sch-rnd-export-vector (1.0.11-2)
- Export formats: vector graphics
- sch-rnd-io-alien (1.0.11-2)
- File format compatibility with other schematics capture tools.
- sch-rnd-lib-gui (1.0.11-2)
- Support library for building the GUI.
- sch-rnd-sim (1.0.11-2)
- High level circuit simulation
- sdcc (4.5.0+dfsg-4+b1 [loong64], 4.5.0+dfsg-4 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x])
- Small Device C Compiler
- sdcc-libraries (4.5.0+dfsg-4)
- Small Device C Compiler (libraries)
- sdcc-ucsim (4.5.0+dfsg-4+b1 [loong64], 4.5.0+dfsg-4 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x])
- Micro-controller simulator for SDCC
- sigrok (0.3)
- Logic analyzer and protocol decoder software suite (metapackage)
- sigrok-cli (0.7.2-1+b4 [arm64], 0.7.2-1+b2 [amd64, armhf, i386, ppc64el, riscv64, s390x], 0.7.2-1+b1 [loong64])
- command-line frontend for the sigrok software
- sigrok-firmware-fx2lafw (0.1.7-3)
- Firmware for Cypress FX2(LP) based logic analyzers
- simavr (1.6+dfsg-3+b4)
- lean and mean AVR simulator
- simulavr (1.0.0+git20160221.e53413b-4)
- Atmel AVR simulator
- simulide (1.1.0.1912+dfsg-4+b1)
- simple real time electronic circuit simulator
- spectools (201601r1-6+b1 [arm64, loong64], 201601r1-6 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- Utilities for using the Wi-Spy USB spectrum analyzer hardware
- spice-crypt (3.0.3-3)
- tool to decrypt encrypted SPICE model files
- spim (8.0+dfsg-8+b1 [arm64, loong64], 8.0+dfsg-8 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- MIPS R2000/R3000 emulator
- srcpd (2.1.7-2+b2 [arm64], 2.1.7-2+b1 [amd64, armhf, i386, loong64, ppc64el, riscv64, s390x])
- SRCP server daemon to control digital model railroads
- stlink-gui (1.8.0-1.1+b2)
- OpenSource ST-Link tools replacement.
- stlink-tools (1.8.0-1.1+b2)
- OpenSource ST-Link tools replacement.
- stm32flash (0.7-1+b2 [arm64], 0.7-1+b1 [loong64, riscv64], 0.7-1 [amd64, armhf, i386, ppc64el, s390x])
- STM32 chip flashing utility using a serial bootloader
- t2n (0.7-2+b2 [arm64], 0.7-2+b1 [loong64], 0.7-2 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- Simple command-line tool for LEGO Mindstorms NXT
- tkgate (2.1+repack-8+b1 [arm64, loong64], 2.1+repack-8 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- Tcl/Tk based digital circuit editor and simulator
- tkgate-data (2.1+repack-8)
- Tcl/Tk based digital circuit editor and simulator - data files
- turbocase (1.8.0-3)
- Generate OpenSCAD case template from a KiCad PCB
- uhubctl (2.6.0-4)
- USB hub per-port power control
- uisp (20050207-4.5+b3 [arm64], 20050207-4.5+b2 [loong64], 20050207-4.5+b1 [amd64, armhf, i386, ppc64el, riscv64, s390x])
- Micro In-System Programmer for Atmel's AVR MCUs
- usbrelay (1.0-2.2+b4 [arm64], 1.0-2.2+b3 [amd64, armhf, i386, ppc64el, riscv64, s390x], 1.0-2.2+b1 [loong64])
- USB HID relay driver
- verilator (5.048-1)
- fast free Verilog simulator
- veroroute (2.40-1)
- Veroboard, Perfboard, and PCB layout and routing application
- veroroute-data (2.40-1)
- Veroboard, Perfboard, and PCB layout and routing application (data package)
- vish (0.0.20130812-1+b2 [arm64], 0.0.20130812-1+b1 [amd64, armhf, i386, loong64, ppc64el, riscv64, s390x])
- Commandline interface for Virtual Instrument Software Architecture
- visolate (3.1.1+dfsg-1)
- tool for engraving PCBs using CNCs
- w1retap (1.5.5-2.1+b1)
- Data logger for 1-Wire weather sensors
- w1retap-mysql (1.5.5-2.1+b1)
- Data logger for 1-Wire weather sensors (MySQL plugin)
- w1retap-odbc (1.5.5-2.1+b1)
- Data logger for 1-Wire weather sensors (ODBC plugin)
- w1retap-pgsql (1.5.5-2.1+b1)
- Data logger for 1-Wire weather sensors (PostgreSQL plugin)
- w1retap-sqlite (1.5.5-2.1+b1)
- Data logger for 1-Wire weather sensors (SQLite plugin)
- wiredpanda (5.1.3-2)
- logic circuits simulator
- wireviz (0.4.1-6)
- Tool for generating wire connection diagrams from YAML
- wireviz-doc (0.4.1-6)
- WireViz documentation & example projects
- xc3sprog (0+svn795+dfsg-6+b1 [loong64], 0+svn795+dfsg-6 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x])
- JTAG flashing tool for FPGAs, CPLDs and EEPROMs
- xcircuit (3.9.73+dfsg.1-2.1+b1 [loong64], 3.9.73+dfsg.1-2.1 [amd64, arm64, armhf, i386, ppc64el, riscv64, s390x])
- Draw circuit schematics or almost anything
- xschem (3.4.4-1+b2 [arm64], 3.4.4-1+b1 [loong64, riscv64], 3.4.4-1 [amd64, armhf, i386, ppc64el, s390x])
- schematic capture program
- yosys (0.66-1)
- Framework for Verilog RTL synthesis
- yosys-abc (0.66-1)
- Sequential Logic Synthesis and Verification Algorithms
- yosys-dev (0.66-1)
- Framework for Verilog RTL synthesis (development files)
