Package: xc3sprog (0+svn795+dfsg-4)

[ Source: xc3sprog  ]

JTAG flashing tool for FPGAs, CPLDs and EEPROMs

xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.

The main features include:

 - Reading a .BIT file from Xilinx design tools and programming it into an
   FPGA.
 - Reading a JEDEC file and programming it into a CPLD.
 - Programming a .BIT file into an on-board configuration PROM.
 - Programming a binary image into on-board SPI flash memory.
 - Reading the contents of a PROM chip back to a file.
 - Programming AVR microcontrollers.

The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:

 - xc3sprog is free software.
 - It is a command-line tool.
 - It works on Linux without the need to install binary "cable-drivers".
   (Although some types of JTAG cables need to load firmware.)
 - It uses an optional configuration file to recognize new JTAG devices.
 - It contains programming algorithms for the supported devices, enabling
   the direct use of binary files (.BIT / JEDEC) from design tools (as opposed
   to intermediate SVF/STAPLE files).

Other Packages Related to xc3sprog

• dep: libc6 (>= 2.7)

  GNU Biblioteca C: Bibliotecas compartilhadas
  also a virtual package provided by libc6-udeb

• dep: libftdi1-2 (>= 1.2)

  C Library to control and program the FTDI USB controllers

• dep: libgcc-s1 (>= 3.5)

  Biblioteca de suporte GCC

• dep: libstdc++6 (>= 5.2)

  Biblioteca C++ padrão da GNU v3

• dep: libusb-0.1-4 (>= 2:0.1.12)

  biblioteca de programação USB em espaço de usuário

Download xc3sprog

Download for all available architectures

Architecture	Package Size	Installed Size	Files
armhf	139.7 kB	496.0 kB	[list of files]