Pacote: mender-client (2.4.1-2 e outros)

[ Fonte: mender-client  ]

Mender over-the-air software updater client.

Mender: over-the-air updater for embedded Linux devices

Mender is an open source over-the-air (OTA) software updater for embedded Linux devices. Mender comprises a client running at the embedded device, as well as a server that manages deployments across many devices.

Embedded product teams often end up creating homegrown updaters at the last minute due to the need to fix bugs in field-deployed devices. However, the most important requirement for an embedded update process is robustness, for example loss of power at any time should not brick a device. This creates a challenge given the time constraints to develop and maintain a homegrown updater.

Mender aims to address this challenge with a robust and easy to use updater for embedded Linux devices, which is open source and available to anyone.

Robustness is ensured with atomic image-based deployments using a dual A/B rootfs partition layout. This makes it always possible to roll back to a working state, even when losing power at any time during the update process.

Ease of use is addressed with an intuitive UI, comprehensive documentation (https://docs.mender.io/), a meta layer for the Yocto Project (https://github.com/mendersoftware/meta-mender) for easy integration into existing environments, and high quality software (see the test coverage badge).

This repository contains the Mender client updater, which can be run in standalone mode (manually triggered through its command line interface) or managed mode (connected to the Mender server).

Mender not only provides the client-side updater, but also the backend and UI for managing deployments as open source. The Mender server is designed as a microservices architecture and comprises several repositories.

To start using Mender, we recommend that you begin with the Getting started section in the Mender documentation (https://docs.mender.io/).

In order to support rollback, the Mender client depends on integration with U-Boot and the partition layout. It is therefore most easily built as part of your Yocto Project image by using the meta layer for the Yocto Project (https://github.com/mendersoftware/meta-mender).

Outros pacotes relacionados a mender-client

• dep: libc6 (>= 2.14) [amd64]

  GNU Biblioteca C: Bibliotecas compartilhadas
  também um pacote virtual fornecido por libc6-udeb

  dep: libc6 (>= 2.17) [arm64]

  dep: libc6 (>= 2.28) [armhf, i386]

• dep: liblzma5 (>= 5.1.1alpha+20120614)

  biblioteca de compressão para formato XZ

• dep: libssl1.1 (>= 1.1.1)

  conjunto de ferramentas "Secure Socket Layer" (SSL) - bibliotecas compartilhadas

• rec: ca-certificates

  certificados CA comuns

• rec: libubootenv-tool (>= 0.3-3~)

  Library to access U-Boot environment - tool

  ou u-boot-tools (<< 2019.10~rc4+dfsg-1~)

  ferramentas auxiliares para o gerenciador de inicialização U-Boot

• rec: mount

  ferramentas para montar e manipular sistemas de arquivo

• rec: procps

  utilitários para o sistema de arquivos /proc

• rec: systemd-sysv

  gerenciador de sistema e serviços - links SysV

Download de mender-client

Baixe para todas as arquiteturas disponíveis

Arquitetura	Versão	Tamanho do pacote	Tamanho instalado	Arquivos
amd64	2.4.1-2+b3	2,759.8 kB	9,587.0 kB	[lista de arquivos]
arm64	2.4.1-2+b3	2,363.4 kB	8,822.0 kB	[lista de arquivos]
armhf	2.4.1-2+b3	2,374.3 kB	7,931.0 kB	[lista de arquivos]
i386	2.4.1-2+b3	2,595.4 kB	8,094.0 kB	[lista de arquivos]