Pakiet: mender-client (3.4.0+ds1-5 i inne)

[ Pakiet źródłowy: mender-client  ]

Mender over-the-air software updater client.

Mender: over-the-air updater for embedded Linux devices

Mender is an open source over-the-air (OTA) software updater for embedded Linux devices. Mender comprises a client running at the embedded device, as well as a server that manages deployments across many devices.

Embedded product teams often end up creating homegrown updaters at the last minute due to the need to fix bugs in field-deployed devices. However, the most important requirement for an embedded update process is robustness, for example loss of power at any time should not brick a device. This creates a challenge given the time constraints to develop and maintain a homegrown updater.

Mender aims to address this challenge with a robust and easy to use updater for embedded Linux devices, which is open source and available to anyone.

Robustness is ensured with atomic image-based deployments using a dual A/B rootfs partition layout. This makes it always possible to roll back to a working state, even when losing power at any time during the update process.

Ease of use is addressed with an intuitive UI, comprehensive documentation (https://docs.mender.io/), a meta layer for the Yocto Project (https://github.com/mendersoftware/meta-mender) for easy integration into existing environments, and high quality software (see the test coverage badge).

This repository contains the Mender client updater, which can be run in standalone mode (manually triggered through its command line interface) or managed mode (connected to the Mender server).

Mender not only provides the client-side updater, but also the backend and UI for managing deployments as open source. The Mender server is designed as a microservices architecture and comprises several repositories.

To start using Mender, we recommend that you begin with the Getting started section in the Mender documentation (https://docs.mender.io/).

In order to support rollback, the Mender client depends on integration with U-Boot and the partition layout. It is therefore most easily built as part of your Yocto Project image by using the meta layer for the Yocto Project (https://github.com/mendersoftware/meta-mender).

Inne pakiety związane z mender-client

• dep: libc6 (>= 2.34)

  Biblioteka GNU C: biblioteki współdzielone
  również pakiet wirtualny udostępniany przez libc6-udeb

• dep: libgcc-s1 (>= 3.4) [ppc64, sparc64]

  Biblioteka wspomagająca GCC

• dep: libglib2.0-0t64 (>= 2.26.0)

  Glib, biblioteka funkcji języka C

• dep: libgo23 [ppc64, sparc64]

  Runtime library for GNU Go applications

• dep: liblzma5 (>= 5.1.1alpha+20120614)

  Biblioteka do kompresji w formacie XZ

• dep: libssl3t64 (>= 3.0.0)

  Zestaw narzędzi Secure Sockets Layer - biblioteki współdzielone

• rec: ca-certificates

  Wspólne certyfikaty CA

• rec: default-dbus-system-bus

  pakiet wirtualny udostępniany przez dbus

  lub dbus-system-bus

  pakiet wirtualny udostępniany przez dbus-broker

• rec: libubootenv-tool (>= 0.3-3~)

  Library to access U-Boot environment - tool

  lub u-boot-tools (<< 2019.10~rc4+dfsg-1~)

  companion tools for Das U-Boot bootloader

• rec: mount

  Narzędzia do montowania i zarządzania systemami plików

• rec: procps

  Narzędzia systemu plikowego /proc

• rec: systemd-sysv

  Menedżer systemu i usług – symboliczne łącza kompatybilności z SysV

Pobieranie mender-client

Pobierz dla wszystkich dostępnych architektur

Architektura	Wersja	Rozmiar pakietu	Rozmiar po instalacji	Pliki
amd64	3.4.0+ds1-5+b7	3 333,6 KiB	10 620,0 KiB	[lista plików]
arm64	3.4.0+ds1-5+b7	2 860,0 KiB	10 112,0 KiB	[lista plików]
armel	3.4.0+ds1-5+b7	2 817,2 KiB	10 028,0 KiB	[lista plików]
armhf	3.4.0+ds1-5+b7	2 809,0 KiB	9 972,0 KiB	[lista plików]
i386	3.4.0+ds1-5+b7	3 068,0 KiB	10 145,0 KiB	[lista plików]
mips64el	3.4.0+ds1-5+b7	2 566,2 KiB	11 559,0 KiB	[lista plików]
ppc64 (port nieoficjalny)	3.4.0+ds1-5+b6	1 866,5 KiB	13 232,0 KiB	[lista plików]
ppc64el	3.4.0+ds1-5+b7	2 838,2 KiB	10 431,0 KiB	[lista plików]
riscv64	3.4.0+ds1-5+b6	2 871,6 KiB	9 972,0 KiB	[lista plików]
s390x	3.4.0+ds1-5+b7	3 012,1 KiB	11 192,0 KiB	[lista plików]
sparc64 (port nieoficjalny)	3.4.0+ds1-5+b6	1 632,6 KiB	12 038,0 KiB	[lista plików]