Tarkennettu haku
squeeze  ] [  wheezy  ] [  jessie  ] [  stretch  ] [  sid  ]
[ Source: scamper  ]

Paketti: scamper (20070523n-1)

Links for scamper



Imuroi lähdekoodipaketti scamper:


External Resources:

Samankaltaisia paketteja:

advanced traceroute and network measurement utility

scamper is a program that is able to conduct Internet measurement tasks to large numbers of IPv4 and IPv6 addresses, in parallel, to fill a specified packets-per-second rate. Currently, it supports the well-known ping and traceroute techniques.

scamper can do ICMP-based Path MTU discovery. scamper starts with the outgoing interface's MTU and discovers the location of Path MTU bottlenecks. scamper performs a PMTUD search when an ICMP fragmentation required message is not returned to establish the PMTU to the next point in the network, followed by a TTL limited search to infer the where failure appears to occur.

Tagit: System Administration: Monitoring, Implemented in: C, User Interface: Command Line, Networking: Scanning, Network Protocol: IP, IPv6, Role: Program, Scope: Utility, Works with: Network Traffic

Muut pakettiin scamper liittyvät paketit

  • depends
  • recommends
  • suggests
  • enhances

Imuroi scamper

Imurointi kaikille saataville arkkitehtuureille
Arkkitehtuuri Paketin koko Koko asennettuna Tiedostot
amd64 95.5 kt252.0 kt [tiedostoluettelo]
armel 83.6 kt220.0 kt [tiedostoluettelo]
i386 82.9 kt220.0 kt [tiedostoluettelo]
ia64 142.6 kt452.0 kt [tiedostoluettelo]
mips 98.0 kt308.0 kt [tiedostoluettelo]
mipsel 99.1 kt312.0 kt [tiedostoluettelo]
powerpc 91.2 kt252.0 kt [tiedostoluettelo]
s390 96.6 kt252.0 kt [tiedostoluettelo]
sparc 80.1 kt220.0 kt [tiedostoluettelo]