Paketti: amanda-server (1:3.5.4-2.1 ja muut)

[ Source: amanda  ]

Advanced Maryland Automatic Network Disk Archiver (Server)

Amanda is a backup system designed to archive many computers on a network to a single large-capacity tape drive. This package is suitable for large amounts of data to backup. For smaller solutions take a look at afbackup, tob, ...

 Features:
  * will back up multiple machines in parallel to a holding disk, blasting
    finished dumps one by one to tape as fast as they can be written to
    tape.  For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host
    with a large holding disk can be filled by Amanda in under 4 hours.
  * built on top of standard backup software: Unix dump/restore, and
    later GNU Tar and others.
  * does simple tape management: will not overwrite the wrong tape.
  * supports tape changers via a generic interface.  Easily customizable
    to any type of tape carousel, robot, or stacker that can be controlled
    via the unix command line.
  * for a restore, tells you what tapes you need, and finds the proper
    backup image on the tape for you.
  * recovers gracefully from errors, including down or hung machines.
  * reports results, including all errors in detail, in email to operators.
  * will dynamically adjust backup schedule to keep within constraints:
    no more juggling by hand when adding disks and computers to network.
  * includes a pre-run checker program, that conducts sanity checks on both
    the tape server host and all the client hosts (in parallel), and will
    send an e-mail report of any problems that could cause the backups to
    fail.
  * can compress dumps before sending or after sending over the net, with
    either compress or gzip.
  * can optionally synchronize with external backups, for those large
    timesharing computers where you want to do full dumps when the system
    is down in single-user mode (since BSD dump is not reliable on active
    filesystems): Amanda will still do your daily dumps.
  * lots of other options; Amanda is very configurable.

For important notes, see /usr/share/doc/amanda-server/README.Debian.

Explanation of suggested programs:

 - perl is needed for some non essential server utilities
 - gnuplot is needed for plotting statistics of backups
 - to backup the tape server, you need to install the client too

Tagit: System Administration: Backup and Restoration, Hardware Enablement: Storage, Implemented in: C, User Interface: interface::daemon, network::server, Networking: Service, Role: Program, Interface Toolkit: uitoolkit::ncurses, works-with-format::tar, Works with: Archive

Muut pakettiin amanda-server liittyvät paketit

• dep: amanda-common (= 1:3.5.1-11.1+b1) [ia64]

  Advanced Maryland Automatic Network Disk Archiver (Libs)

  dep: amanda-common (= 1:3.5.4-1+b1) [m68k, x32]

  dep: amanda-common (= 1:3.5.4-2) [sh4]

  dep: amanda-common (= 1:3.5.4-2.1) [ei ia64, m68k, sh4, x32]

• dep: bsd-mailx

  simple mail user agent

  tai mailx

  näennäispaketti, jonka toteuttaa bsd-mailx, mailutils

• dep: libc6 (>= 2.38) [ei alpha, ia64, loong64, sh4]

  GNU-C-kirjasto: jaetut kirjastot
  myös näennäispaketti, jonka toteuttaa libc6-udeb

  dep: libc6 (>= 2.40) [sh4]

  dep: libc6 (>= 2.41) [loong64]

• dep: libc6.1 (>= 2.37) [ia64]

  GNU-C-kirjasto: jaetut kirjastot
  myös näennäispaketti, jonka toteuttaa libc6.1-udeb

  dep: libc6.1 (>= 2.38) [alpha]

• dep: libcurl4 (>= 7.16.2) [ia64]

  easy-to-use client-side URL transfer library (OpenSSL flavour)

• dep: libcurl4t64 (>= 7.16.2) [ei ia64]

  easy-to-use client-side URL transfer library (OpenSSL flavour)

• dep: libglib2.0-0 (>= 2.75.3) [ia64]

  GLib library of C routines

• dep: libglib2.0-0t64 (>= 2.76.0) [ei ia64]

  GLib library of C routines

• dep: libjson-perl

  module for manipulating JSON-formatted data

• dep: perl

  Larry Wallin kieli tekstitiedostojen analysointia ja raportointia varten

• sug: amanda-client (= 1:3.5.1-11.1+b1) [ia64]

  Advanced Maryland Automatic Network Disk Archiver (Client)

  sug: amanda-client (= 1:3.5.4-1+b1) [m68k, x32]

  sug: amanda-client (= 1:3.5.4-2) [sh4]

  sug: amanda-client (= 1:3.5.4-2.1) [ei ia64, m68k, sh4, x32]

• sug: cpio

  GNU cpio -- ohjelma pakattujen tiedostojen käsittelyyn

  tai mt-st

  Linux SCSI tape driver aware magnetic tape control (aka mt)

• sug: gnuplot

  Command-line driven interactive plotting program.
  myös näennäispaketti, jonka toteuttaa gnuplot-nox, gnuplot-qt, gnuplot-x11

Imuroi amanda-server

Imurointi kaikille saataville arkkitehtuureille

Arkkitehtuuri	Versio	Paketin koko	Koko asennettuna	Tiedostot
alpha (epävirallinen siirros)	1:3.5.4-2.1	445.6 kt	1,455.0 kt	[tiedostoluettelo]
amd64	1:3.5.4-2.1	451.0 kt	1,093.0 kt	[tiedostoluettelo]
arm64	1:3.5.4-2.1	432.1 kt	1,321.0 kt	[tiedostoluettelo]
armhf	1:3.5.4-2.1	442.9 kt	1,248.0 kt	[tiedostoluettelo]
hppa (epävirallinen siirros)	1:3.5.4-2.1	446.6 kt	1,032.0 kt	[tiedostoluettelo]
i386	1:3.5.4-2.1	459.6 kt	1,104.0 kt	[tiedostoluettelo]
ia64 (epävirallinen siirros)	1:3.5.1-11.1+b1	479.4 kt	1,413.0 kt	[tiedostoluettelo]
loong64 (epävirallinen siirros)	1:3.5.4-2.1	440.2 kt	1,315.0 kt	[tiedostoluettelo]
m68k (epävirallinen siirros)	1:3.5.4-1+b1	440.2 kt	1,056.0 kt	[tiedostoluettelo]
ppc64 (epävirallinen siirros)	1:3.5.4-2.1	447.0 kt	1,449.0 kt	[tiedostoluettelo]
ppc64el	1:3.5.4-2.1	455.5 kt	1,449.0 kt	[tiedostoluettelo]
riscv64	1:3.5.4-2.1	440.7 kt	989.0 kt	[tiedostoluettelo]
s390x	1:3.5.4-2.1	442.8 kt	1,065.0 kt	[tiedostoluettelo]
sh4 (epävirallinen siirros)	1:3.5.4-2	482.4 kt	1,317.0 kt	[tiedostoluettelo]
sparc64 (epävirallinen siirros)	1:3.5.4-2.1	434.6 kt	9,864.0 kt	[tiedostoluettelo]
x32 (epävirallinen siirros)	1:3.5.4-1+b1	452.7 kt	1,040.0 kt	[tiedostoluettelo]