Paketti: qrouter (1.4.71-2)

[ Source: qrouter  ]

Multi-level, over-the-cell maze router

Qrouter is a tool to generate metal layers and vias to physically connect together a netlist in a VLSI fabrication technology. It is a maze router, otherwise known as an "over-the-cell" router or "sea-of-gates" router. That is, unlike a channel router, it begins with a description of placed standard cells, usually packed together at minimum spacing, and places metal routes over the standard cells.

Qrouter uses the open standard LEF and DEF formats as file input and output. It takes the cell definitions from a LEF file, and analyzes the geometry for each cell to determine contact points and route obstructions. It then reads the cell placement, pin placement, and netlist from a DEF file, performs the detailed route, and writes an annotated DEF file as output.

Muut pakettiin qrouter liittyvät paketit

• dep: libc6 (>= 2.29)

  GNU-C-kirjasto: jaetut kirjastot
  myös näennäispaketti, jonka toteuttaa libc6-udeb

• dep: libtcl8.6 (>= 8.6.0)

  Tcl (the Tool Command Language) v8.6 - run-time library files

• dep: libtk8.6 (>= 8.6.0)

  Tk toolkit for Tcl and X11 v8.6 - run-time files

• dep: libx11-6

  X11 client-side library

• dep: tkcon

  Enhanced interactive console for developing in Tcl

Imuroi qrouter

Imurointi kaikille saataville arkkitehtuureille

Arkkitehtuuri	Paketin koko	Koko asennettuna	Tiedostot
arm64	120.0 kt	319.0 kt	[tiedostoluettelo]