Paketti: upslug2 (11-5)

[ Source: upslug2  ]

utility to upgrade the firmware of a Linksys NSLU2 via the network

upslug2 is a command line program intended to allow the upgrade of a Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives) firmware to new or different versions. When a NSLU2 in the local network is put in upgrade mode, upslug2 can connect to it and upload a new firmware.

upslug2 will accept a full firmware image but it can also upgrade the flash from individual files holding the kernel, ramdisk and root filesystem. upslug2 provides status information during the upgrade process and verifies the written image after the upgrade.

Tagit: System Administration: Configuration Tool, Hardware Support, Hardware Enablement: hardware::storage, interface::commandline, Network Protocol: Need an extra tag, Role: Program, Scope: Utility

Muut pakettiin upslug2 liittyvät paketit

• dep: libc6 (>= 2.15) [ei arm64]

  GNU-C-kirjasto: jaetut kirjastot
  myös näennäispaketti, jonka toteuttaa libc6-udeb

  dep: libc6 (>= 2.17) [arm64]

• dep: libgcc1 (>= 1:3.0) [ei armhf]

  GCC:n apukirjasto

  dep: libgcc1 (>= 1:3.5) [armhf]

• dep: libstdc++6 (>= 5)

  GNU standardi C++ -kirjasto, versio 3

Imuroi upslug2

Imurointi kaikille saataville arkkitehtuureille

Arkkitehtuuri	Paketin koko	Koko asennettuna	Tiedostot
amd64	28.4 kt	82.0 kt	[tiedostoluettelo]
arm64	27.6 kt	78.0 kt	[tiedostoluettelo]
armhf	25.6 kt	61.0 kt	[tiedostoluettelo]
i386	29.4 kt	77.0 kt	[tiedostoluettelo]