Tarkennettu haku
[  squeeze  ] [  wheezy  ] [  sid  ]
[ Source: openocd  ]

Paketti: openocd (0.5.0-1 ja muut)

Links for openocd

Screenshot

Debian-palvelut:

Imuroi lähdekoodipaketti openocd:

Ylläpitäjät:

External Resources:

Samankaltaisia paketteja:

Open on-chip JTAG debug solution for ARM and MIPS systems

OpenOCD is an on-chip debugging, in-system programming and boundary-scan testing tool for ARM and MIPS systems.

The debugger uses an IEEE 1149-1 compliant JTAG TAP bus master to access on-chip debug functionality available on ARM based microcontrollers or system-on-chip solutions. For MIPS systems the EJTAG interface is supported.

User interaction is realized through a telnet command line interface, a gdb (the GNU debugger) remote protocol server, and a simplified RPC connection that can be used to interface with OpenOCD's Jim Tcl engine.

OpenOCD supports various different types of JTAG interfaces/programmers: 

  * Parallel port wigglers:
    * Macraigor Wiggler JTAG cable (and many clones)
    * Xilinx DLC5 JTAG parallel cable III (and many clones)
    * Amontec JTAG Accelerator
    * Gateworks GW16012 JTAG programmer
    * Wiggler 2 cable (basically a wiggler with an LED)
    * Wiggler with NTRST inverted
    * AMT Wiggler
    * Ka-Ro TRITON starterkit II JTAG cable
    * Lattice parallel port JTAG cable
    * ST FlashLINK programming cable
  * USB FT2232 based dongles:
    * USBJTAG
    * Amontec JTAGkey
    * Amontec JTAGkey-Tiny
    * OOCD-Link
    * eVerve Signalyzer
    * Luminary Micro Stellaris/LM3S811 Evaluation Board A
    * Olimex ARM-USB-OCD
    * TinCanTools Flyswatter
    * Turtelizer 2
    * Hitex STR9-comStick
    * Hitex STM32-PerformanceStick
    * Axiom AXM-0432 Link
    * Section5 ICEbear
  * USB JLINK based adapters:
    * Atmel SAMICE (only works with Atmel chips)
    * Segger J-Link
    * IAR J-Link
  * USB RLINK based adapters:
    * Raisonance RLink
    * STM32 Primer
  * USB other:
    * USBprog
    * ASIX PRESTO
    * Versaloon-Link
    * ARM-JTAG-EW
  * Standalone systems:
    * Zylin ZY1000
  * Other:
    * EP93xx based Linux machine
    * AT91RM9200

OpenOCD supports debugging on a number of different ARM/MIPS cores: 

  * ARM7:
    * ARM7TDMI(-s)
    * ARM720t
  * ARM9:
    * ARM9TDMI
    * ARM920t
    * ARM922t
    * ARM926ej-s
    * ARM966e-s
  * ARM11
    * ARM1136
    * ARM1156
    * ARM1176
  * Intel XScale:
    * PXA25x
    * PXA26x
    * PXA27x
    * IXP42x
    * IXP45x
    * IXP46x
  * Cortex-M3
    * Luminary Stellaris LM3
    * ST STM32
  * MIPS m4k
  * Marvell Feroceon CPU core (as found in the Orion SoC family)

Flash programming/writing is supported for: 

  * External CFI compatible flashes:
    * Intel and AMD/Spansion command set
  * Internal flashes:
    * LPC2000
    * AT91SAM7
    * STR7x
    * STR9x
    * LM3
    * STM32x
  * LPC3180 NAND flash

Tagit: Software Development: Debugging, Hardware Enablement: Embedded, Implemented in: C, Role: Program

Muut pakettiin openocd liittyvät paketit

  • depends
  • recommends
  • suggests

Imuroi openocd

Imurointi kaikille saataville arkkitehtuureille
Arkkitehtuuri Versio Paketin koko Koko asennettuna Tiedostot
alpha (epävirallinen siirros) 0.5.0-1 3,058.9 kt8,134.0 kt [tiedostoluettelo]
amd64 0.5.0-1 2,651.7 kt7,492.0 kt [tiedostoluettelo]
armel 0.5.0-1 2,507.5 kt6,452.0 kt [tiedostoluettelo]
armhf 0.5.0-1 2,438.7 kt4,679.0 kt [tiedostoluettelo]
hppa 0.4.0-1+nmu1 2,805.7 kt6,604.0 kt [tiedostoluettelo]
hurd-i386 0.5.0-1+b1 2,572.5 kt5,594.0 kt [tiedostoluettelo]
i386 0.5.0-1 2,596.1 kt6,872.0 kt [tiedostoluettelo]
ia64 0.5.0-1 3,365.6 kt15,104.0 kt [tiedostoluettelo]
kfreebsd-amd64 0.5.0-1 2,628.1 kt6,756.0 kt [tiedostoluettelo]
kfreebsd-i386 0.5.0-1 2,572.4 kt6,132.0 kt [tiedostoluettelo]
m68k (epävirallinen siirros) 0.2.0+r2529-1 1,763.8 kt4,764.0 kt [tiedostoluettelo]
mips 0.5.0-1 2,675.3 kt7,144.0 kt [tiedostoluettelo]
mipsel 0.5.0-1 2,662.1 kt7,144.0 kt [tiedostoluettelo]
powerpc 0.5.0-1 2,625.7 kt6,924.0 kt [tiedostoluettelo]
powerpcspe (epävirallinen siirros) 0.5.0-1 2,654.1 kt6,992.0 kt [tiedostoluettelo]
s390x 0.5.0-1 2,768.7 kt6,748.0 kt [tiedostoluettelo]
sh4 (epävirallinen siirros) 0.5.0-1 2,568.3 kt6,476.0 kt [tiedostoluettelo]
sparc 0.5.0-1 2,546.7 kt6,820.0 kt [tiedostoluettelo]