Paketti: xc3sprog (0+svn795+dfsg-3)

[ Source: xc3sprog  ]

JTAG flashing tool for FPGAs, CPLDs and EEPROMs

xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.

The main features include:

 - Reading a .BIT file from Xilinx design tools and programming it into an
   FPGA.
 - Reading a JEDEC file and programming it into a CPLD.
 - Programming a .BIT file into an on-board configuration PROM.
 - Programming a binary image into on-board SPI flash memory.
 - Reading the contents of a PROM chip back to a file.
 - Programming AVR microcontrollers.

The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:

 - xc3sprog is free software.
 - It is a command-line tool.
 - It works on Linux without the need to install binary "cable-drivers".
   (Although some types of JTAG cables need to load firmware.)
 - It uses an optional configuration file to recognize new JTAG devices.
 - It contains programming algorithms for the supported devices, enabling
   the direct use of binary files (.BIT / JEDEC) from design tools (as opposed
   to intermediate SVF/STAPLE files).

Muut pakettiin xc3sprog liittyvät paketit

• dep: libc6 (>= 2.14) [amd64]

  GNU-C-kirjasto: jaetut kirjastot
  myös näennäispaketti, jonka toteuttaa libc6-udeb

  dep: libc6 (>= 2.17) [arm64, ppc64el]

  dep: libc6 (>= 2.7) [ei amd64, arm64, ppc64el]

• dep: libftdi1-2 (>= 1.2)

  C Library to control and program the FTDI USB controllers

• dep: libgcc-s1 (>= 3.0) [ei armel, armhf]

  GCC:n apukirjasto

  dep: libgcc-s1 (>= 3.5) [armel, armhf]

• dep: libstdc++6 (>= 5.2)

  GNU standardi C++ -kirjasto, versio 3

• dep: libusb-0.1-4 (>= 2:0.1.12)

  userspace USB programming library

Imuroi xc3sprog

Imurointi kaikille saataville arkkitehtuureille

Arkkitehtuuri	Paketin koko	Koko asennettuna	Tiedostot
amd64	156.1 kt	692.0 kt	[tiedostoluettelo]
arm64	147.8 kt	672.0 kt	[tiedostoluettelo]
armel	137.3 kt	592.0 kt	[tiedostoluettelo]
armhf	140.4 kt	492.0 kt	[tiedostoluettelo]
i386	164.1 kt	728.0 kt	[tiedostoluettelo]
mips64el	152.7 kt	815.0 kt	[tiedostoluettelo]
mipsel	151.4 kt	736.0 kt	[tiedostoluettelo]
ppc64el	163.3 kt	1,076.0 kt	[tiedostoluettelo]
s390x	143.9 kt	700.0 kt	[tiedostoluettelo]