2007
mimedefang (2.57-5) unstable; urgency=low
* Remove obsolete mbox switches from clamscan command line (closes: #413606) * initial German debconf translation (closes: #413902) * Updated Czech translation (closes: #413218)
-- Christoph Martin <christoph.martin@uni-mainz.de> Thu, 8 Mar 2007 18:05:15 +0100
mimedefang (2.57-4) unstable; urgency=high
* add depend on adduser (closes: #408255) * fix japanese debconf translation (closes: #403488)
-- Christoph Martin <christoph.martin@uni-mainz.de> Fri, 26 Jan 2007 14:43:57 +0100
2006
mimedefang (2.57-3) unstable; urgency=low
* update japanese debconf translation (closes: #402618)
-- Christoph Martin <christoph.martin@uni-mainz.de> Wed, 13 Dec 2006 15:11:01 +0100
mimedefang (2.57-2) unstable; urgency=high
* change group of /var/spool/MIMEDefang back to defang, because we no
longer depend on sendmail (closes: #398368, #398996)
* add if available user smmsp to group defang (closes: #381335)
-- Christoph Martin <christoph.martin@uni-mainz.de> Fri, 17 Nov 2006 16:33:42 +0100
mimedefang (2.57-1) unstable; urgency=low
* New upstream release
* mimedefang-multiplexor: New scheduling algorithm tries to keep
commands "sticky". For example, when looking for a slave to run
"recipok", we prefer to use a slave that recently ran "recipok".
NOTE!!! If your filter incorrectly retains state from earlier
callbacks into filter_begin, this scheduling change WILL expose
the bugs in your filter.
* mimedefang-multiplexor.c: New "md-mx-ctrl hload" command keeps track
of load for past 1, 4, 12 and 24 hours. Gives long-term data to
complement the short-term "md-mx-ctrl load" data.
* mimedefang.pl.in: Pass LOCAL_STATE_DIR => '/var/lib' to
Mail::SpamAssassin constructor. If your LOCAL_STATE_DIR
is elsewhere, you'll have to hack the Perl code, I'm afraid.
(closes: #366636)
* change depends on sendmail to recommends, since mimedefang can run on
different host than sendmail (closes: #373300)
-- Christoph Martin <christoph.martin@uni-mainz.de> Mon, 7 Aug 2006 17:55:31 +0200
mimedefang (2.56-1) unstable; urgency=low
* New upstream release (closes: #351288) * mimedefang.c: The new '-R' option lets you reserve a specified number of slaves for connections from localhost. The idea is to try to allow clientmqueue runs to succeed even on heavily-loaded systems. * mimedefang.pl.in: The filter_begin function is now passed a single argument ($entity) representing the parsed message. *** NOTE INCOMPATIBILITY *** filter_begin NOW TAKES ONE ARGUMENT, NOT ZERO. IF YOUR FILTER HAS A PROTOTYPE FOR filter_begin, YOU SHOULD FIX OR REMOVE THE PROTOTYPE * mimedefang.c, mimedefang.pl.in: Added new action_insert_header to prepend headers (rather than appending them). Only works properly with Sendmail 8.13; on older versions of Sendmail, falls back to action_add_header. Based on patch from Matthew van Eerde. * mimedefang.pl.in: Added new function md_get_bogus_mx_hosts. Allows to test for sender domains with bogus MX hosts (such as hosts that resolve to the loopback or private IP addresses.) * mimedefang.c: Do NOT strip "bare CR" characters from e-mails by default. The new "-c" command-line option enables the older behavior. *** NOTE INCOMPATIBILITY *** WE NO LONGER STRIP BARE CR's FROM MESSAGES BY DEFAULT. TEST YOUR FILTERS CAREFULLY TO MAKE SURE THEY CAN COPE WITH THIS, OR USE THE -c FLAG. * mimedefang.c(rcptto): If you returned ACCEPT_AND_NO_MORE_FILTERING from filter_recipient, the spool files wouldn't get cleaned up, eventually clogging the spool directory. This has been fixed.
-- Christoph Martin <christoph.martin@uni-mainz.de> Mon, 13 Mar 2006 17:17:12 +0100
mimedefang (2.53-2) unstable; urgency=low
* added swedish debconf translation (closes: #331556) * updated french debconf translation (closes: #332329)
-- Christoph Martin <christoph.martin@uni-mainz.de> Mon, 13 Mar 2006 16:08:54 +0100
2005
mimedefang (2.53-1) unstable; urgency=low
* New upstream release (closes: #312278) * mimedefang.pl: We don't detect and load Perl modules until the detect_and_load_perl_modules() function is called. * should bring speed improvements * include alternate dependency on debconf-2.0 * fix type on debconf template (closes: #312788) * include virnamese debconf translation (closes: #312787) * add french debconf translation (closes: #302651) * include japanese debconf translation (closes: #310162) * add czeck debconf translation (closes: #319851)
-- Christoph Martin <christoph.martin@uni-mainz.de> Tue, 27 Sep 2005 17:26:15 +0200
mimedefang (2.51-2) unstable; urgency=low
* make mimedefang again read /etc/mail/sa-mimedefang.cf (closes: #295467) * reformulate debconf templates files and correct Description line (closes: #294936) * add french debconf translation (closes: #295962)
-- Christoph Martin <christoph.martin@uni-mainz.de> Wed, 23 Feb 2005 15:53:15 +0100
mimedefang (2.51-1) unstable; urgency=high
* New upstream security fix release
* fixes a possible security hole in function percent_encode
* Added "-q" option to mimedefang. This permits the multiplexor
to queue new incoming connections. It may make higher utilization
of slaves and improve throughput.
-- Christoph Martin <christoph.martin@uni-mainz.de> Fri, 11 Feb 2005 18:31:44 +0100
mimedefang (2.49-1) unstable; urgency=low
* New upstream release
* mimedefang.c: Fix stupid logic error that made MIMEDefang ignore
the Sendmail {if_addr} macro when setting IP address for
X-Scanned-By: header.
* embperl.c: Soften warning about file descriptors being opened
in filter. Some systems seem to do this (Solaris).
* change group of user defang from nogroup to new group defang (closes:
#285998)
* put spam_assassin_init in mimedefang-filter into filter_initialize to
remove warning about opened file descriptors outside a function when
using embperl (closes: #283495)
* include debconf support
* ask for embedded perl usage
-- Christoph Martin <christoph.martin@uni-mainz.de> Fri, 4 Feb 2005 15:48:52 +0100
2004
mimedefang (2.48-1) unstable; urgency=low
* New upstream release (closes: #279558) * SECURITY FIX: mimedefang.c: Tempfail message if RESULTS file doesn't terminate with 'F' line. (Detects disk-full condition.) * mimedefang-multiplexor.c: Added mechanism for slaves to send back "status reports" to the multiplexor. The command "md-mx-ctrl slaves" now shows the current status of busy slaves (eg, "Running SpamAssassin", "recipok <addr@domain.net>", etc.) * Added support for Command "csav" anti-virus. * mimedefang.pl.in: append_html_boilerplate and append_text_boilerplate refuse to tamper with S/MIME messages. They won't descend into multipart/signed or multipart/encrypted parts. Similarly for remove_redundant_html_parts. * mimedefang.pl.in: Split-and-rebuild algorithm is greatly improved. In particular: In filter_end, the $entity->head correctly contains all message headers. And we try to avoid creating useless multipart containers -- if we would end up with a multipart/mixed or multipart/alternative with only one sub-part, we "pop" the sub-part up to the top level. * mimedefang.c: Add IP address of scanning host to X-Scanned-By: header. * mimedefang.pl.in: flatten_mime removed. * action_add_part revamped completely;
-- Christoph Martin <christoph.martin@uni-mainz.de> Fri, 12 Nov 2004 17:28:53 +0100
mimedefang (2.45-2) unstable; urgency=low
* install sa-mimedefang.cf in correct location and remove the wrong one
(closes: #275295)
* make description more precise (dependency on sendmail) (closes:
#275787)
-- Christoph Martin <christoph.martin@uni-mainz.de> Mon, 11 Oct 2004 17:26:44 +0200
mimedefang (2.45-1) unstable; urgency=low
* New upstream release
* mimedefang-multiplexor.c: Add the "-a" command-line option
for opening a socket that only allows unprivileged commands.
These are commands that fetch status, but can't affect operation
of multiplexor.
* mimedefang.pl.in: Added filter_create_parser user-supplied
callback to create a MIME::Parser object. This lets you customize
how parsing happens.
* mimedefang.pl.in (md_check_against_smtp_server): Add optional
$port argument to specify checking against a port other than 25.
* watch-mimedefang.in: Huge rewrite. Displays a lot more info about
the MIMEDefang server. Can monitor a remote MIMEDefang server over
a low-bandwidth SSH connection.
* mimedefang.pl.in: Implemented a new set of RBL lookup functions
that perform multiple lookups in parallel and allow you to set
a timeout (the timeout applies to ALL lookups, not each individual
lookup.) These new functions require the Net::DNS module.
* move Depends: tk8.3 | wish to Recommends to help install mimedefang
without X11 and tcl (closes: #273752)
-- Christoph Martin <christoph.martin@uni-mainz.de> Mon, 4 Oct 2004 18:55:16 +0200
mimedefang (2.44-1) unstable; urgency=high
* remove patch for #256927 which causes a segfault with newer perl
version (5.8.4) and makes it unusable (closes: #262590)
* new upstream version (closes: #263490)
* NEW: Support for Sendmail's SOCKETMAP map class.
* NEW: Support for Sendmail's QUARANTINE feature. This leaves
quarantined messages in your mail queue, and is NOT THE SAME as
MIMEDefang's quarantine.
* mimedefang.pl.in: Add "Precedence: bulk" headers to all
MIMEDefang-generated notifications.
* mimedefang-multiplexor.c (sigterm): If multiplexor is killed,
we kill all slaves with SIGTERM. We wait for up to 10 seconds, and
if there are still slaves that haven't exited, we kill them
with SIGKILL.
* remove sleep while restarting. Issue should be solved by upstream (see
above)
* change mimedefang.pl so that more variables can be set via
mimedefang.pl.conf (closes: #261651)
-- Christoph Martin <christoph.martin@uni-mainz.de> Thu, 5 Aug 2004 18:02:49 +0200
mimedefang (2.43-2) unstable; urgency=low
* fix watchfile
-- Christoph Martin <christoph.martin@uni-mainz.de> Wed, 28 Jul 2004 11:21:58 +0200
mimedefang (2.43-1) unstable; urgency=low
* new upstream version (closing: #256833)
* filter_relay, filter_sender and filter_recipient can return
a fifth element specifying a delay before returning a code
to the SMTP client. This lets you implement tarpitting without
tying up a Perl slave. However, the delay does tie up a libmilter
thread.
* Modified C and Perl code so that filter_relay is called
when remote client connects rather than after MAIL FROM.
* mimedefang-multiplexor.c: Add -X option to run a "tick" request
every so often. Added -Y option to set syslog label.
* mimedefang.pl.in: Call md_openlog lazily so users can call it from
filter to change syslog label.
* fix X_SCANNED_BY option processing in init script (closes: 251077)
(thanks to Jonathan Hankins)
* backport memory-leak fix from 2.44Beta (closes: #256927)
-- Christoph Martin <christoph.martin@uni-mainz.de> Mon, 5 Jul 2004 15:28:05 +0200
mimedefang (2.42-1) unstable; urgency=low
* new upstream version
* mimedefang.pl.in (md_copy_orig_msg_to_work_dir): Added
md_copy_orig_msg_to_work_dir and
md_copy_orig_msg_to_work_dir_as_mbox_file functions to help
virus-scanners that want the entire message, or want it in
UNIX mbox format.
* mimedefang.pl.in (spam_assassin_mail): Add support for
SpamAssassin 3.0.0's new Perl API.
-- Christoph Martin <christoph.martin@uni-mainz.de> Tue, 4 May 2004 11:41:30 +0200
mimedefang (2.41-2) unstable; urgency=low
* include new package graphdefang * remove *conffiles to get rid of lintian warning
-- Christoph Martin <christoph.martin@uni-mainz.de> Wed, 31 Mar 2004 11:21:15 +0200
mimedefang (2.41-1) unstable; urgency=low
* new upstream version
* mimedefang.pl.in (send_quarantine_notifications): Include
host name in quarantine mail body (Dirk Mueller).
* mimedefang.pl.in (entity_contains_virus_clamd): Check for "ERROR"
return message from clamd (Nate Carlson).
(action_quarantine_entire_message): Do not send out an e-mail
message if $msg is non-blank (pointed out by many users...)
(entity_contains_virus_hbedv): Replace -allfiles with correct
--allfiles (Ken Cormack)
(entity_contains_virus_sophos): Add -mime option for Sophos sweep
(Dirk Mueller)
* include a backported fix from 2.42-BETA-1 to close the syslog file
descriptor before others
-- Christoph Martin <christoph.martin@uni-mainz.de> Tue, 30 Mar 2004 15:00:58 +0200
mimedefang (2.40-1) unstable; urgency=low
* new upstream version
* mimedefang.pl.in: Added message_contains_virus and
entity_contains_virus functions to mimedefang.pl.in. They use
every installed virus scanner. Based on idea from Chris Myers.
*** NOTE INCOMPATIBILITY ***
The previous example filter defined functions called
message_contains_virus and entity_contains_virus. These are now
defined in mimedefang.pl itself; you should remove the definitions
from your filter!
* Default action for viruses is now discard.
* Added a new "notification" facility to allow external software to
react to changes in multiplexor state.
* We now pass both the raw input message and the unpacked, decoded
parts to the virus scanner. This makes virus detection much more
reliable.
-- Christoph Martin <christoph.martin@uni-mainz.de> Tue, 16 Mar 2004 16:53:24 +0100
mimedefang (2.39-1) unstable; urgency=low
* new upstream
* mimedefang-multiplexor.c: Added support for embedding a
Perl interpreter, which should improve performance a fair bit.
* mimedefang.pl.in: Added support for "filter_initialize" function
that gets called once each time a slave is activated. If you
are using an embedded Perl interpreter, read the mimedefang-filter
man page carefully, especially the INITIALIZATION AND CLEANUP
section!
* (doHistogram): Added "histo" command to md-mx-ctrl. It prints
a histogram showing how often a given number of slaves have been
busy.
* examples/suggested-minimum-filter-for-windows-clients: Made
the filter_bad_filename tests less paranoid. (closes: #231078)
* add a sleep of 3 seconds to make restart not fail sometimes (closes:
#201990)
* change permission of /var/spool/MIMEDefang to 750 and group smmsp to
make sendmail able to read (closes: #225785)
-- Christoph Martin <christoph.martin@uni-mainz.de> Wed, 18 Feb 2004 17:28:48 +0100
2003
mimedefang (2.38-2) unstable; urgency=low
* add X_SCANNED_BY config option (closes: #220504)
-- Christoph Martin <christoph.martin@uni-mainz.de> Mon, 17 Nov 2003 16:33:53 +0100
mimedefang (2.38-1) unstable; urgency=low
* new upstream ( for all changes see upstream Changelog )
* mimedefang.pl.in: Disable action_notify_sender if a virus
is detected. (closes: #212222)
* mimedefang.h: Change SMALLBUF definition from 4096 to 16384 for
longer SpamAssassin reports.
-- Christoph Martin <christoph.martin@uni-mainz.de> Tue, 21 Oct 2003 16:50:27 +0200
mimedefang (2.37-1) unstable; urgency=low
* new upstream ( for all changes see upstream Changelog )
* mimedefang.c: Make more conservative use of file descriptors.
Added "-C" option to enable ultra-conservative use of file
descriptors (by closing/reopening files in each callback.)
* examples/suggested-minimum-filter-for-windows-clients: Proper
regexp to detect CLSID attacks (Nik Clayton)
* mimedefang-multiplexor.c, mimedefang.c: Added -D option
to stay in foreground instead of daemonizing (Ben Kamen).
* mimedefang.pl.in: Initialize $SALocalTestsOnly to 1.
-- Christoph Martin <christoph.martin@uni-mainz.de> Wed, 8 Oct 2003 16:59:57 +0200
mimedefang (2.35-1) unstable; urgency=low
* new upstream ( for all changes see upstream Changelog )
* (action_notify_administrator): action_notify_administrator can
be called OUTSIDE a message context, in which case it immediately
sends e-mail to the administrator. (Suggested by Dirk Mueller.)
-- Christoph Martin <christoph.martin@uni-mainz.de> Mon, 7 Jul 2003 13:04:41 +0200
mimedefang (2.34-1) unstable; urgency=low
* new upstream ( for all changes see upstream Changelog )
* Renamed md_log to md_graphdefang_log.
YOU MUST update your filter, and change all instances of
"md_log_enable" to "md_graphdefang_log_enable" and
"md_log" to "md_graphdefang_log"
* New feature: Added the filter_unknown_cmd hook so user-filters
can extend the MIMEDefang protocol. Updated md-mx-ctrl as well.
See mimedefang-protocol(7) and mimedefang-filter(5) for details.
* mimedefang.pl.in (spam_assassin_mail): More fixes to the
headers that get generated for SpamAssassin (Dirk Mueller).
Also created and documented the $AddApparentlyToForSpamAssassin
variable.
* mimedefang-filter.5.in: Documented md_syslog. md_syslog
is now an officially-supported API function.
* mimedefang.c, mimedefang.pl.in: Allow Perl filters to specify
SMTP reply codes (4xx, 5xx) and DSN status codes (4.x.y, 5.x.y)
(Suggested by user "jkohan" on the MIMEDefang Web site.)
* unset HOME in init script to prevent SpamAssassin from trying to use
root's home directory when restarting from the command line (closes:
#198428)
-- Christoph Martin <christoph.martin@uni-mainz.de> Mon, 7 Jul 2003 09:49:47 +0200
mimedefang (2.33-1) unstable; urgency=low
* new upstream ( for all changes see upstream Changelog )
* mimedefang.c: Clean up working directory sooner in many different
places.
* mimedefang.c(eom): Delete all but the first "Content-Type:" header
in the e-mail message, and log a warning if there is more than one
such header.
* syslog-fac.c: Added "-S" option to mimedefang and
mimedefang-multiplexor to set syslog facility. Also, created
and documented global variable $SyslogFacility in mimedefang-filter.
* mimedefang.pl.in (synthesize_received_header): Add a Received:
header when remailing messages.
-- Christoph Martin <christoph.martin@uni-mainz.de> Fri, 4 Jul 2003 09:46:07 +0200
mimedefang (2.32-1) unstable; urgency=low
* new upstream ( for all changes see upstream Changelog )
* Updated documentation (mimedefang-filter.5, mimedefang-protocol.7)
to reflect current reality.
* mimedefang-multiplexor.c: Major changes to the internal logic
of the slave scheduler. Should be more efficient than the old
system.
* mimedefang.pl.in: Added remove_redundant_html_parts() to delete HTML
parts if a corresponding text/plain part is present in the message.
* mimedefang.pl.in (replace_entire_message): Added
replace_entire_message function to replace the entire message
with a user-supplied MIME::Entity in filter_end.
* From filter_begin to filter_end, the hash %RecipientMailers
contains rcpt_mailer, rcpt_host and rcpt_addr for each recipient.
* The function filter_recipient gets passed three additional
arguments: $rcpt_mailer, $rcpt_host and $rcpt_addr, which are
taken from the corresponding Sendmail macros. See the Sendmail
documentation for more information.
*** NOTE INCOMPATIBILITY *** filter_recipient is passed
three additional arguments; if you use function prototypes,
you may need to adjust your filter!
-- Christoph Martin <christoph.martin@uni-mainz.de> Fri, 25 Apr 2003 14:44:21 +0200
mimedefang (2.30-1) unstable; urgency=low
* new upstream ( for all changes see upstream Changelog )
* Better syslog messages on certain system call failures
* Add handling for filter_cleanup, that lets you run Perl code just
before a slave is killed.
* Multiplexor reads commands in chunks rather than a character at a
time. Greatly reduces system-call overhead, but not likely to make
much difference except on incredibly busy mail servers.
* Add support for Trophie scanning library.
* Log the Sendmail QUEUE-ID in most logging messages
* For filter_relay, filter_sender and filter_recipient, use
'CONTINUE', 'TEMPFAIL' and 'REJECT' instead of 1, -1, and 0. Also add
'ACCEPT_AND_NO_MORE_FILTERING' to accept mail without further
processing. The old numeric return codes still work,but are
deprecated.
* More explicit log messages.
* Set global variables in filter_relay, filter_sender and
filter_recipient based on the information available so far in the SMTP
transaction.
* Quarantine notifications no longer sent unless you explicitly ask
for them.
* Added send_quarantine_notifications routine which actually sends
quarantine notifications. Unless you call this function in
filter_end, quarantine notifications are NO LONGER SENT.
* Added md_check_against_smtp_server to check recipient addresses
before accepting them.
* fix typo in init script (closes: #177557)
-- Christoph Martin <christoph.martin@uni-mainz.de> Mon, 17 Feb 2003 16:46:06 +0100
2002
mimedefang (2.24-2) unstable; urgency=low
* fix problem with wrong DEFANGUSER in init script (closes: #167294)
-- Christoph Martin <christoph.martin@uni-mainz.de> Mon, 4 Nov 2002 11:39:12 +0100
mimedefang (2.24-1) unstable; urgency=low
* new upstream
* mimedefang.pl.in: Many functions which only make sense if called
from filter_begin, filter, filter_multipart or filter_end syslog error
messages if they are called from outside one of those functions.
* mimedefang-multiplexor.c (activateSlave): Reset signal handlers to
default before starting Perl filter program.
* Added md-mx-ctrl program and watch-mimedefang GUI. Tcl/Tk is
required for "watch-mimedefang".
* mimedefang-protocol.7.in: Updated protocol documentation.
* mimedefang.pl.in (resend_message): Do not remove angle brackets from
$Sender when resending message.
* SECURITY UPDATE: An attacker with sufficient bandwidth may be able to
crash mimedefang-multiplexor for versions up to 2.22. This
attack cannot be used to execute attacker's code; it's only a
denial-of-service attack.
* mimedefang.pl.in: Added action_delete_all_headers
* mimedefang.pl.in: Added $VirusName variable (John Kirkland)
-- Christoph Martin <christoph.martin@uni-mainz.de> Thu, 31 Oct 2002 11:05:52 +0100
mimedefang (2.21-1) unstable; urgency=low
* new upstream
* SECURITY UPDATE: Default filter rejects attachments of type
"message/partial". See
http://online.securityfocus.com/archive/1/291514
* mimedefang-multiplexor.c (statsLog): Do not log the date/time
if we log stats using syslog; it's redundant. We still include
a UNIX timestamp.
* mimedefang.pl.in: Quarantine functions try to make a
hard link when copying messages; fall back to actual copy
if hard link fails. This can greatly improve performance.
* examples/suggested-minimum-filter-for-windows-clients:
More "dangerous" extensions; tighter conditions for suspecting
CLSID attack (thanks to Nik Clayton).
* examples/suggested-minimum-filter-for-windows-clients:
Added three new "dangerous" extensions: .app, .fxp and .prg.
Thanks to Marco Berizzi.
* examples/suggested-minimum-filter-for-windows-clients:
Allow filenames like "foo@bar.com,innocuous.txt" rather
than choking on the ".com," part.
* mimedefang.c (cleanup): Use an internal C implementation of
"rm -rf" rather than forking and execing /bin/rm. This should
improve performance on heavily-loaded systems.
* corrected include of /etc/mail/mimedefang.conf in init script (closes:
#162044)
* change priority to extra, because we depend on sendmail, which is
extra
-- Christoph Martin <christoph.martin@uni-mainz.de> Thu, 26 Sep 2002 13:52:58 +0200
mimedefang (2.19-1) unstable; urgency=low
* new upstream
* mimedefang.pl.in (send_mail): Invoke Sendmail with "-odb"
(background delivery) rather than "-odi" (immediate delivery).
* mimedefang.c (eom): Write a final 'F' line to signify end
of COMMANDS file.
* mimedefang.c (eom): Fixed dumb error in which cmdFP was
closed before the final command was written.
* All internally-generated messages and resent messages are
delivered in "deferred" mode now.
* Fixed warnings about uninitialized variables.
* Lowered some syslog output to "debug" level.
* mimedefang.pl.in (signal_complete): Improved quarantine notification
message.
-- Christoph Martin <christoph.martin@uni-mainz.de> Thu, 29 Aug 2002 17:08:38 +0200
mimedefang (2.16-3) unstable; urgency=low
* exclude /usr/local/bin from PATH in configure script to prevent it to
find localy installed virus scanner (closes: #156699)
* improve description (closes: #156536)
-- Christoph Martin <christoph.martin@uni-mainz.de> Fri, 16 Aug 2002 10:39:25 +0200
mimedefang (2.16-2) unstable; urgency=low
* added some missing builddepends (closes: #156418)
-- Christoph Martin <christoph.martin@uni-mainz.de> Tue, 13 Aug 2002 11:30:55 +0200
mimedefang (2.16-1) unstable; urgency=low
* Initial Release. (closes #130634, #155124)
-- Christoph Martin <christoph.martin@uni-mainz.de> Wed, 7 Aug 2002 15:08:57 +0200