2010
dma (0.0.2010.06.17-6) unstable; urgency=low
* Add the 37-gnu-hurd patch to really fix the FTBFS on GNU/Hurd. * Convert several shell output assignments from = to := * Switch to bzip2 compression for the Debian tarball.
-- Peter Pentchev <roam@ringlet.net> Sun, 17 Oct 2010 00:08:33 +0300
dma (0.0.2010.06.17-5) unstable; urgency=low
* Only use SA_NOCLDWAIT if available to fix the Hurd FTBFS.
-- Peter Pentchev <roam@ringlet.net> Thu, 07 Oct 2010 11:42:23 +0300
dma (0.0.2010.06.17-4) unstable; urgency=low
* Fix an infinite loop in dma-migrate if char is unsigned.
Closes: #599172
* Switch to Git and point the Vcs-* fields to Gitorious.
-- Peter Pentchev <roam@ringlet.net> Wed, 06 Oct 2010 17:30:29 +0300
dma (0.0.2010.06.17-3) unstable; urgency=low
* Update the debconf translations:
- French by Steve Petruzzello; Closes: #587883
* Bump Standards-Version to 3.9.1 with no changes.
* Disable deferred delivery by default, as in the upstream version:
- in the 03-debian-locations patch, comment the DEFER keyword in dma.conf,
as it is upstream
- refresh the 11-double-bounce.patch
- reword the README.Debian section on deferred delivery a bit
- add a news blurb
-- Peter Pentchev <roam@ringlet.net> Tue, 27 Jul 2010 13:34:27 +0300
dma (0.0.2010.06.17-2) unstable; urgency=low
* Quick on the heels of -1 to fix a momentary lapse of reason on my part:
in the 03-debian-locations patch, revert part of the 0.0.2010.06.17-1
change: do not set a un-overrideable default for the deferred delivery!
Closes: #587593
* Update the debconf translations:
- Japanese by Hideki Yamane; Closes: #587543
-- Peter Pentchev <roam@ringlet.net> Wed, 30 Jun 2010 11:59:46 +0300
dma (0.0.2010.06.17-1) unstable; urgency=low
* New upstream version:
- no longer reports the remote port number; Closes: #544820
- fixes some queue locking problems; Closes: #582593
- adapt the rules file to use the GNU Makefile instead of the BSD one
- drop pmake from Build-Depends
- remove the 01-debian-build patch, overtaken by upstream changes
- in the 03-debian-locations patch, make the Debian defaults actual
defaults for the dma binary, not just in the dma.conf file
- adapt the 04-debian-setgid patch for the GNU Makefile
- in the 10-liblockfile patch, change the GNU Makefile, too
- enhance the 11-double-bounce patch a bit:
- use dma's own delqueue() function instead of a naive unlink() so
all the queue files are cleaned up
- document the Debian default for DBOUNCEPROG in the manual page
- resurrect the 13-hardening patch, correcting a couple of
unchecked asprintf(3) and vasprintf(3) invocations
- the functionality of the 20-parse-recipient patch was implemented
upstream in a different way, so replace it with a small bugfix
- remove the 22-openfiles patch, overtaken by upstream changes
- in the 24-random-message-id patch, change the GNU Makefile, too
- add the 27-int-size patch to cast a variable to the correct type
- add the 28-valid-recipient patch to fix parsing recipients out of
the message body
- add the 29-double-free patch to fix a double-free error
- add the 30-ldflags patch to honor LDFLAGS if specified
- refresh the 09-typos, 17-mailname, 23-dirent-d_type, and
25-unsupported-starttls patches
- teach the dbounce-simple-safecat handler about the M*/Q* spool
files scheme
* Bump Standards-Version to 3.9.0 with no changes.
* Update the copyright file:
- bring it up to the latest revision of the DEP 5
- update the upstream copyright notices
- bump the year on my copyright notice
* Remove the diffsrc rules target which was intended for my own
internal use, but has outlived its time.
* Use dpkg-buildflags from dpkg-dev >= 1.15.7~ to get the default
values for CFLAGS, CPPFLAGS, and LDFLAGS; no longer rely on
dpkg-buildpackage to set them by default.
* Add the dma-migrate utility (in a separate binary package) to convert
spool files to the new queue format (M* and Q* files for each message)
* Add a dma-migrate invocation to dma.cron.d
* Shorten the Vcs-Browser URL.
* Add the 31-sigalrm-backoff patch to force a delivery attempt on SIGALRM.
* Properly substitute the debconf-supplied values for DBOUNCEPROG and
SMARTHOST into dma.conf even if they are empty without generating
an invalid dma.conf file.
* Remove the smarthost default; dma does MX lookups now, so it doesn't
really need one anymore.
* Reword the debconf relayhost question - dma does not really need
a smarthost anymore.
* Update the debconf translations:
- Bulgarian
- Portuguese by Américo Monteiro
- German by Helge Kreutzmann; Closes: #586531
- Russian by Yuri Kozlov; Closes: #586579
- Czech by Michal Simunek; Closes: #586791
- Swedish by Martin Bagge; Closes: #586825
- Spanish by Francisco Javier Cuadrado; Closes: #587088
* Update the smarthost configuration information in README.Debian.
* Add the 32-comment-uncomment patch to correct the manual page wording.
* Add the 33-opportunistic-tls patch to allow remote connections to proceed
even if the STARTTLS negotiation fails.
* Fix the 25-unsupported-starttls patch to actually error out if the SSL
negotiation fails.
* Forward all the non-Debian-specific patches upstream to Simon Schubert.
* Add the 34-manpage-defaults patch to properly document what dma will use
as default values if not specified in the config file instead of what
the default config file specifies. Closes: #544748
* Add the 35-delivery-retry patch to try local deliveries a bit more often
and to randomize the delivery timeout to avoid locking issues.
-- Peter Pentchev <roam@ringlet.net> Mon, 28 Jun 2010 23:26:36 +0300
2009
dma (0.0.2009.07.17-3) unstable; urgency=low
* Really install the files in /etc/dma/ as root/mail/640 and
change the ownership of the existing files in the postinst script
when upgrading from older versions. Closes: #544664
* Install the /usr/bin/mailq and /usr/bin/newaliases symlinks.
Closes: #558421
* Switch to the 3.0 (quilt) source format.
* Update the debconf translations:
- add German. Closes: #552754
- add Japanese. Closes: #554515
- remove a double space and unfuzzy the translations. Closes: #552586
* Fix a crash when the SMTP server does not support STARTTLS.
Closes: #547594
* Always use the user-supplied value from the debconf query for
the smarthost and the double-bounce program. This may result in
debconf overriding a manually-edited config file, so add a note to
dma.conf stating that these values are handled via debconf.
Closes: #544663
* Fix a misspelling of dma/dbounceprog as dma/defer in the debconf
configuration script. Oops.
-- Peter Pentchev <roam@ringlet.net> Sat, 19 Dec 2009 14:35:10 +0200
dma (0.0.2009.07.17-2) unstable; urgency=low
* Allow the spool directory to live on a filesystem that does not
set the d_type member of the dirent structure, like XFS.
Closes: #544357
* Randomize the Message-Id a bit more. Closes: #544475
* Bump Standards-Version to 3.8.3 with no changes.
* Only enable the build hardening wrapper if the "hardening" build
option is specified.
* Switch the copyright file header from the Wiki to DEP 5.
* Remove the manual page ".Dx" patch - the groff version in Squeeze
knows about the .Dx mdoc macro. Add a lintian override for
the "Unknown DragonFly version" error.
* Convert the patch file headers to the DEP 3 format.
-- Peter Pentchev <roam@ringlet.net> Tue, 01 Sep 2009 13:36:33 +0300
dma (0.0.2009.07.17-1) unstable; urgency=low
* Initial release
(Closes: #511410, #533458, #533614, #533890, #534101, #534860)
-- Peter Pentchev <roam@ringlet.net> Tue, 11 Aug 2009 16:08:41 +0300