2006
bluez-utils (3.7-1) unstable; urgency=low
* New upstream release * removed some more patched included upstream * do not Suggest python anymore, bluez-pin is gone * remove hidd/hcid/pand/dund man pages, they are included upstream * remove sysvinit dep (closes: #386132)
-- Filippo Giunchedi <filippo@debian.org> Mon, 2 Oct 2006 00:20:01 +0200
bluez-utils (3.5-1) unstable; urgency=medium
* New upstream release (closes: #384379) * urgency medium since we are closing RC bugs * removed bluez-bcm203x, obsoleted by upstream * fix MAKEDEV usage (Closes: #387182, #387193, #387197, #387410) * removed merged/obsolete patches: - debian/patches/000_rfcomm_conf_example.patch - debian/patches/006_xsims.patch - debian/patches/007_hcid_typo.patch - debian/patches/004_rfcomm_usage.patch * correctly set and restore IFS in /etc/init.d/bluetooth while parsing SDPTOOL_OPTIONS (Closes: #388514)
-- Filippo Giunchedi <filippo@debian.org> Sun, 17 Sep 2006 13:35:40 +0200
bluez-utils (3.1-4) unstable; urgency=medium
* Acknowledge NMU by Marga, this closes: #379200 * fixed udev rules accordingly with upstream * strip trailing \n if found in passkey (also closes: 383188) * fix /etc/default/bluetooth in README.Debian (closes: #383783) * add dbus to depends: for passkey management while discussing a better solution (closes: #382791, #380283) * register_passkeys when doing an initscript restart (closes: 381582) * fix register-passkeys shell redirection (closes: #380452)
-- Filippo Giunchedi <filippo@debian.org> Sun, 20 Aug 2006 14:18:19 +0200
bluez-utils (3.1-3.1) unstable; urgency=medium
* Non-maintainer upload to fix Failure To Build From Source in builders
that use sudo instead of fakeroot. (Closes: #379200)
-- Margarita Manterola <marga@debian.org> Wed, 2 Aug 2006 19:38:40 -0300
bluez-utils (3.1-3) unstable; urgency=low
* s/PWD/CURDIR/ to avoid sudo FTBFSage, thanks Dato! (Closes: #379200) * new handling of outgoing PIN requests: there's a /usr/lib/bluetooth/register-passkey script that is invoked by the init script, it registers every passkey found in /etc/bluetooth/passkeys via the /usr/lib/bluetooth/add-passkey (a modified version of upstream's passkey-agent). /etc/bluetooth/pin is converted to /etc/bluetooth/passkeys/default if found. I hope this Closes: #378446 . README.Debian updated accordingly. * fix postinst for bluez-pcmcia-support as we don't ship /etc/pcmcia/bluetooth anymore (Closes: #378836)
-- Filippo Giunchedi <filippo@debian.org> Tue, 25 Jul 2006 12:05:58 +0200
bluez-utils (3.1-2) unstable; urgency=low
* more LSB info added to init script
* default pin (or passkey) is 1234 (patch to hcid.conf)
* drop bluez-pin dep (see #378427) as it is obsolete and install
passkey-agent from upstream instead (Closes: #378446, #239820, #241120)
* drop bluetooth-desktop as well
* really install pcmcia-support udev rules (Closes: #377976)
* do not install devfs rules as it is deprecated (Closes: #374307)
-- Filippo Giunchedi <filippo@debian.org> Sun, 17 Jul 2006 09:21:50 +0200
bluez-utils (3.1-1) unstable; urgency=low
* New upstream release
* removed patches/003_hcid_conf_addition.patch: external PIN helper is no
longer used, DBUS is used instead
* removed patches/003_manpages.patch: applied upstream
* removed patches/010_rfcomm_tty.patch: applied upstream
-- Filippo Giunchedi <filippo@debian.org> Mon, 3 Jul 2006 18:58:07 +0200
bluez-utils (2.25-2) unstable; urgency=low
* added BLUETOOTH_ENABLE to /etc/default/bluetooth (Closes: #360915) * document /etc/bluetooth/pan/dev-up in pand.1 (Closes: #237825) * added info about discovering devices to README.Debian (Closes: #304222) * improved /etc/init.d/bluetooth, now featuring SDPTOOL_OPTIONS and using bash instead of sh (because of $IFS usage, improvements are welcome) (Closes: #185082) 3+ years old! * Depend: makedev | udev * fix the rfcomm 'anycommand' bug, upstream CVS patch (Closes: #229167) * fix the obscure error message from rfcomm when tty support is not available (Closes: #322732)
-- Filippo Giunchedi <filippo@debian.org> Fri, 2 Jun 2006 14:10:35 +0200
bluez-utils (2.25-1) unstable; urgency=low
* new upstream version
* install anything from /etc/dbus*/, thanks to Hendrik Sattler
(Closes: #284745)
* first remove dangling init.d links, then move /etc/init.d/bluez-utils to
bluetooth (Closes: #351330)
-- Filippo Giunchedi <filippo@debian.org> Mon, 13 Feb 2006 22:31:26 +0100
bluez-utils (2.24-2) unstable; urgency=high
* tight the dependency on lsb-base (>= 3.0-3) since we are using
log_daemon_msg (Closes: #350876)
* change dependency on makedev as suggested by Steve Langasek
(Closes: #350591)
* expand on hcid.conf(5) about pin helper parameters (Closes: #297566)
-- Filippo Giunchedi <filippo@debian.org> Sun, 5 Feb 2006 21:52:39 +0100
bluez-utils (2.24-1) unstable; urgency=low
* upload to unstable, rebuilding against dbus 0.60
(Closes: #337988, #338794)
* make use of makedev in bluez-utils.postinst and conflict with
experimental's makedev (Closes: #338743)
-- Filippo Giunchedi <filippo@debian.org> Mon, 9 Jan 2006 14:04:55 +0100
2005
bluez-utils (2.24-0exp1) experimental; urgency=low
* New upstream christmas release, really bugfix only * rebuild against dbus (closes: #338794) * fix hcid/security.c typo (closes: #339413) * reworked bluetooth init script
-- Filippo Giunchedi <filippo@debian.org> Mon, 26 Dec 2005 11:51:03 +0100
bluez-utils (2.23-0exp1) experimental; urgency=low
* New upstream release, Closes: #338260 * suggest: python (>=1.5) this closes: #328410 * dbus_pin_helper is now documented in hcid.conf manpage (Closes: #295742) * added bluetooth and bluetooth-desktop metapackages for LSB 3.0 compilance * updated 003_manpages.patch
-- Filippo Giunchedi <filippo@debian.org> Tue, 20 Dec 2005 14:15:37 +0100
bluez-utils (2.19-1) unstable; urgency=high
* New upstream release. * Urgency high as fixes hcid pin helper vulnerability (CAN-2005-2547) (Closes: #323365) * Bump libbluetooth1-dev build dependency to 2.19 * Add note about new features in debian/NEWS
-- Edd Dumbill <ejad@debian.org> Fri, 19 Aug 2005 01:12:02 +0100
bluez-utils (2.18-1) unstable; urgency=low
* New upstream version (Closes: #311743) * Add amd64 to archs for bluez-pcmcia-support (Closes: #294489) * bluez-utils.init: use -q option to hid2hci, remove /dev/null redirection.
-- Edd Dumbill <ejad@debian.org> Sat, 16 Jul 2005 14:15:37 +0100
bluez-utils (2.15-2) unstable; urgency=low
* Don't make device nodes if using udev (Closes: #283866)
-- Edd Dumbill <ejad@debian.org> Sun, 6 Feb 2005 15:55:45 +0000
bluez-utils (2.15-1) unstable; urgency=low
* New upstream release. * debian/control: require libbluetooth1-dev 2.15 or better to build. * Update 003_manpages.patch. * Retire 007_hidd_role_switch.patch as now in upstream.
-- Edd Dumbill <ejad@debian.org> Sat, 5 Feb 2005 18:09:24 +0000
2004
bluez-utils (2.10-6) unstable; urgency=low
* Move the bluez-bcm203x package to contrib and make it depend on the
non-free firmware.
-- Edd Dumbill <ejad@debian.org> Wed, 1 Dec 2004 14:53:30 +0000
bluez-utils (2.10-5) unstable; urgency=high
* Build depend on libbluetooth1 >= 2.10-2, to get HID fix in for
big endian PowerPC machines and fix possible buffer overflow
vulnerability. See bug 281090 for more information.
-- Edd Dumbill <ejad@debian.org> Mon, 29 Nov 2004 16:48:39 +0000
bluez-utils (2.10-4) unstable; urgency=low
* Reflect rename of bluez-bcm203x-firmware to bluez-firmware. * Update README.Debian to reference use of firmware packages.
-- Edd Dumbill <ejad@debian.org> Fri, 12 Nov 2004 14:13:30 +0000
bluez-utils (2.10-3) unstable; urgency=low
* New package: bluez-bcm203x for Broadcom firmware loading on 2.4 series
kernels.
* bluez-utils now suggests the firmware package; many dongles require
it to work.
-- Edd Dumbill <ejad@debian.org> Fri, 12 Nov 2004 14:00:59 +0000
bluez-utils (2.10-2) unstable; urgency=high
* rules, bluez-pcmcia-support.postinst: ensure /etc/pcmcia/bluetooth is
executable.
-- Edd Dumbill <ejad@debian.org> Fri, 12 Nov 2004 10:55:41 +0000
bluez-utils (2.10-1) unstable; urgency=medium
* New upstream release. Contains bugfixes useful for sarge.
* Retire 007_pcmcia_conf.patch.
* Add 007_hidd_role_switch.patch, which stops hidd forcing role switch.
Added --master to HIDD_OPTIONS to ensure that Apple Bluetooth Keyboards
reconnect automatically. (Closes: #274495)
-- Edd Dumbill <ejad@debian.org> Thu, 14 Oct 2004 15:03:06 +0100
bluez-utils (2.9-4) unstable; urgency=high
* Added patch 007_pcmcia_conf.patch, to fix breakage with PCMCIA startup.
Thanks Zoltan Ivanfi. (Closes: #271622)
-- Edd Dumbill <ejad@debian.org> Wed, 15 Sep 2004 12:26:47 +0100
bluez-utils (2.9-3) unstable; urgency=high
* debian/bluez-utils.init: Kill HCI connection on stop/start. Avoids need
for taking batteries out of Microsoft Bluetooth mouse on restart.
* debian/bluez-utils.init: Silence hid2hci output, it's noisy and shouldn't
complain if no hid dongles found.
* Fix a path in README.Debian (Closes: #266041)
-- Edd Dumbill <ejad@debian.org> Sun, 29 Aug 2004 18:21:22 +0100
bluez-utils (2.9-2) unstable; urgency=low
* Add in libusb-dev dependency so hid2hci is built.
-- Edd Dumbill <ejad@debian.org> Sun, 8 Aug 2004 16:58:39 +0100
bluez-utils (2.9-1) unstable; urgency=low
* New upstream release.
* Remove "XSI-isms" from init script, thanks David Weinehall
(Closes: #259837)
* Update configure flags.
* Update Debian NEWS file.
* Depend on libbluetooth1-dev >= 2.9-1.
-- Edd Dumbill <ejad@debian.org> Sun, 8 Aug 2004 15:44:08 +0100
bluez-utils (2.8-1) unstable; urgency=low
* New upstream release.
- Fixes initialisation of bnep interfaces (Closes: #256436)
* Remove everything in the 2.6 modprobe conf that's in the default
installation anyway. This basically leaves hidp protocol.
* Move dbus1-dev builddep to right place in control file (Closes: #257055)
* Don't install unrequired printers.conf.
* Amend README.Debian.bluez-cups to reflect no printers.conf.
* Retire hidd patch.
* Make hid startup happen before PAN startup (Closes: #258835)
* Include hcid.conf man page (Closes: #257041)
* Depend on libbluetooth1-dev >= 2.8-1
-- Edd Dumbill <ejad@debian.org> Fri, 16 Jul 2004 21:08:55 +0100
bluez-utils (2.7-5) unstable; urgency=low
* Add separate modprobe config for kernel 2.6 (Closes: #255188)
-- Edd Dumbill <ejad@debian.org> Sat, 19 Jun 2004 20:37:40 +0100
bluez-utils (2.7-4) unstable; urgency=low
* Add support for HID proxy dongles in the init script. These
will now be switched on after hidd starts.
* Don't scribble permissions for /dev/rfcomm* on each install
(Closes: #231510)
-- Edd Dumbill <ejad@debian.org> Mon, 14 Jun 2004 14:24:12 +0100
bluez-utils (2.7-3) unstable; urgency=low
* Upload to unstable.
-- Edd Dumbill <ejad@debian.org> Wed, 9 Jun 2004 23:25:51 +0100
bluez-utils (2.7-2) experimental; urgency=low
* Add fix from Marcel Holtmann for hidd killall command
-- Edd Dumbill <ejad@debian.org> Wed, 26 May 2004 19:43:04 +0100
bluez-utils (2.7-1) experimental; urgency=low
* New upstream.
* Further large changes: this package now incorporates dund and pand.
* Updated man page patches.
* Updated hcid.conf patch.
* Enable building with D-BUS support.
* Enable building of CUPS backend: goes in new package bluez-cups.
Added printers.conf file and CUPS readme file.
* Integrated pand and dund startup stuff into the init script.
* Updated README.Debian.
* Now Conflicts, Replaces bluez-pan.
* Install module aliases in /etc/modprobe.d.
-- Edd Dumbill <ejad@debian.org> Wed, 26 May 2004 12:43:08 +0100
bluez-utils (2.6-1) experimental; urgency=low
* New upstream. In experimental as big changes.
* Build for all except s390.
* Conflicts with old bluez-sdp: this functionality is now in
the bluez-utils package.
* Merged startup from bluez-sdp into bluez-utils startup.
postinst now removes rc.d links for bluez-sdp.
-- Edd Dumbill <ejad@debian.org> Thu, 6 May 2004 11:58:16 +0100
bluez-utils (2.4-6) unstable; urgency=high
* Remove others-readable permissions from devfs configuration of rfcomm devices. Do the same for the non-devfs versions. (Closes: #229782)
-- Edd Dumbill <ejad@debian.org> Mon, 26 Jan 2004 15:55:52 +0000
bluez-utils (2.4-5) unstable; urgency=low
* Use $(DEB_DESTDIR) in rules, don't assume debian/tmp. This should fix build failures on some of the buildds.
-- Edd Dumbill <ejad@debian.org> Thu, 15 Jan 2004 23:22:56 +0000
bluez-utils (2.4-4) unstable; urgency=low
* Practically all of the work for this upload done by Philipp Matthias Hahn
-- thanks Philipp!
* bluez-pcmcia-support is Arch: alpha,arm,i386,ia64,powerpc only, because
hppa,m68k,mips,mipsel,s390,sparc don't have pcmcia-cs. (Closes: #227925)
* Improve all manual pages. (patch 003_manpages.patch)
* Update rfcomm/main.h:usage() and rfcomm/rfcomm.1 (Closes: #227069)
(patch 004_rfcomm_usage.patch)
* Move bluepin and hcitool to /usr/bin (Closes: #226876)
* Moved l2ping to /sbin.
-- Edd Dumbill <ejad@debian.org> Thu, 15 Jan 2004 18:22:20 +0000
bluez-utils (2.4-3) unstable; urgency=low
* Don't install devfsd devices file, really (Closes: #220146) * Add corresponding note about older kernels and devfs. * Ensure NEWS.Debian is distributed (Closes: #227390)
-- Edd Dumbill <ejad@debian.org> Wed, 14 Jan 2004 11:47:19 +0000
bluez-utils (2.4-2) unstable; urgency=low
* Depend on modutils or module-init-tools (Closes: #226366) * Maybe bluez-pcmcia-support be extra in priority, like pcmcia-cs
-- Edd Dumbill <ejad@debian.org> Tue, 6 Jan 2004 10:41:31 +0000
bluez-utils (2.4-1) unstable; urgency=low
* New upstream. * Fix restart order (Closes: #224199) * Use mksymlink in devfsd conf file (Closes: #220146) * Add cmtp alias to the modutils file * Updated NEWS.Debian to note rfcomm config file change, update sample rfcomm config file
-- Edd Dumbill <ejad@debian.org> Thu, 1 Jan 2004 20:19:09 +0000
2003
bluez-utils (2.3-4) unstable; urgency=low
* Restart rfcomm in init script restart (Closes: #216907)
-- Edd Dumbill <ejad@debian.org> Sat, 25 Oct 2003 22:30:39 +0100
bluez-utils (2.3-3) unstable; urgency=low
* Change python-gtk suggests to python-gtk-1.2 (Closes: #208119)
-- Edd Dumbill <ejad@debian.org> Wed, 24 Sep 2003 13:21:58 +0100
bluez-utils (2.3-2) unstable; urgency=low
* Fix net-pf-31 alias to 'bluez' not 'hci_usb'
* Move to cdbs
* Change priority to 'optional'
* Bump standards version to 3.5.9
* Depend on the DBUS bluez-pin helper, and deprecate use of the
buggy Python pin helper as a default. (Closes: #196092, #191444)
* Move Python deps to Suggests.
* Add explanation to README.Debian that headset utils are very
experimental and not for installation (Closes: #196225)
* Use start-stop-daemon in init file.
* Change default PIN to '1234' as 'BlueZ' can't be used with most cellphone
PIN requests.
* Change default hcid.conf to include hostname in interface ID.
-- Edd Dumbill <ejad@debian.org> Thu, 28 Aug 2003 12:38:35 +0100
bluez-utils (2.3-1) unstable; urgency=low
* New upstream release
- hciconfig: CSR firmware revision support, voice commands now
working on big endian machines
- hciattach: support Texas Bluetooth modules, high UART rates on
Ericsson modules, BCSP initialisation fixes
- hcitool: support role switch command
- removes glib dependency
* Remove rfcomm lexing patch, now incorporated upstream
-- Edd Dumbill <ejad@debian.org> Sat, 22 Mar 2003 13:53:09 +0000
bluez-utils (2.2-4) unstable; urgency=low
* Moved to Colin's Build System.
-- Edd Dumbill <ejad@debian.org> Sat, 22 Mar 2003 12:27:26 +0000
bluez-utils (2.2-3) unstable; urgency=low
* Added versioned pcmcia-cs dependency for bluez-pcmcia-support,
needs pcmcia-cs 3.2 or better. (Closes: #181685)
* Amended bluepin to explictly require gtk 1.2 in anticipation
of the change of python-gtk to default to gtk 2.0.
* Fixed spelling mistake in bluepin.
-- Edd Dumbill <ejad@debian.org> Sat, 22 Feb 2003 11:54:32 +0000
bluez-utils (2.2-2) unstable; urgency=low
* Fixed permissions of /dev/bluetooth and /dev/bluetooth/rfcomm.
Thanks Gerd Flaig. (Closes: #181428)
* Added rfcomm initialisation into init file, commented out example
entry in rfcomm.conf so it doesn't get set up on init
* Fixed a bug in rfcomm which meant an empty config file would
generate a syntax error.
-- Edd Dumbill <ejad@debian.org> Tue, 18 Feb 2003 00:32:26 +0000
bluez-utils (2.2-1) unstable; urgency=low
* New upstream release
- support for voice settings in hciconfig
- updated man pages
- bug fixes to hcitool
* Updated standards version to 3.5.8
-- Edd Dumbill <ejad@debian.org> Wed, 1 Jan 2003 14:28:29 +0000
2002
bluez-utils (2.1-3) unstable; urgency=low
* /dev/rfcomm* now chgrp to 'dialout', thanks to Joey Hess for
pointing this out
* README.Debian updated to reflect status quo of kernel modules
-- Edd Dumbill <ejad@debian.org> Mon, 2 Dec 2002 20:03:42 +0000
bluez-utils (2.1-2) unstable; urgency=low
* Added directory creation to devfs devices file (thanks Zdzislaw
A.Kaleta)
* Fixed chgrp of /dev/rfcomm* to group 'bluetooth'
-- Edd Dumbill <ejad@debian.org> Thu, 31 Oct 2002 07:47:44 +0000
bluez-utils (2.1-1) unstable; urgency=low
* New upstream release
- adds kernel support for rfcomm
* Made postinst create correct rfcomm* and vhci devices
and add a system group 'bluetooth'
-- Edd Dumbill <ejad@debian.org> Tue, 8 Oct 2002 17:01:35 +0100
bluez-utils (2.0-release-2) unstable; urgency=low
* Added modutils alias entries for bnep and rfcomm, which will be
available in the latest releases of the kernel modules.
-- Edd Dumbill <ejad@debian.org> Tue, 08 Oct 2002 16:59:57 +0100
bluez-utils (2.0-release-1) unstable; urgency=low
* New upstream release * Updated maintainer address to my Debian address * Updated standards version to 3.5.6 * Package now updates /etc/modutils/bluez for the BlueZ modules * hcid is now stopped and started on an upgrade
-- Edd Dumbill <ejad@debian.org> Sat, 31 Aug 2002 20:27:43 +0100
bluez-utils (2.0-pre12-2) unstable; urgency=low
* Added AM_MAINTAINER_MODE to configure.in (Closes: #154929) For more info on why I did this, see http://lists.debian.org/debian-devel/2001/debian-devel-200111/msg01422.html
-- Edd Dumbill <edd@usefulinc.com> Wed, 31 Jul 2002 11:28:30 +0100
bluez-utils (2.0-pre12-1) unstable; urgency=low
* New upstream release * Added TODO list, removed redundant upstream README
-- Edd Dumbill <edd@usefulinc.com> Wed, 26 Jun 2002 12:37:26 +0100
bluez-utils (2.0-pre9-5) unstable; urgency=low
* Added missing build-depends on bison and flex
-- Edd Dumbill <edd@usefulinc.com> Sat, 15 Jun 2002 20:19:05 +0100
bluez-utils (2.0-pre9-4) unstable; urgency=low
* Added build-depends on libglib1.2-dev
-- Edd Dumbill <edd@usefulinc.com> Tue, 11 Jun 2002 21:57:00 +0100
bluez-utils (2.0-pre9-3) unstable; urgency=low
* Moved startup priority to 25, so as to be after pcmcia.
-- Edd Dumbill <edd@usefulinc.com> Sun, 5 May 2002 18:33:00 +0100
bluez-utils (2.0-pre9-2) unstable; urgency=low
* Fixed bluepin to find the running X server properly under Debian.
-- Edd Dumbill <edd@usefulinc.com> Sun, 5 May 2002 15:32:00 +0100
bluez-utils (2.0-pre9-1) unstable; urgency=low
* New upstream version. * Follow upstream's versioning conventions.
-- Edd Dumbill <edd@usefulinc.com> Thu, 2 May 2002 16:24:00 +0100
bluez-utils (1.99.8-3) unstable; urgency=low
* Separated out PCMCIA support files into bluez-pcmcia-support.
* Added --always-pcmcia option to configure script so we can force
PCMCIA support scripts install.
-- Edd Dumbill <edd@usefulinc.com> Fri, 19 Apr 2002 11:36:00 +0100
bluez-utils (1.99.8-2) unstable; urgency=low
* Fixed killall returning error in init script.
-- Edd Dumbill <edd@usefulinc.com> Wed, 17 Apr 2002 01:00:00 +0100
bluez-utils (1.99.8-1) unstable; urgency=low
* Initial Release.
-- Edd Dumbill <edd@usefulinc.com> Wed, 17 Apr 2002 01:00:00 +0100